Difference between revisions of "Cisco 6503 and Cisco 6503-E"

From NesevoWiki
Jump to navigationJump to search
 
(16 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
==Video Datasheet==
 +
[http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/ps6775/prod_video_datasheet_catalyst_6503e.html Cisco Catalyst 6503-E Datasheet]
 
==Supervisor engines==
 
==Supervisor engines==
Both, the Cisco6503 and the Cisco6503-E router have three horizontal slots being numbered from 1 (top) to 3 (bottom)
+
[[image:WS-C6503-E front.jpg|framed|WS-C6503-E front]]
 +
[[image:WS-C6503-E rear.jpg|framed|WS-C6503-E rear]]
 +
Both, the Cisco WS-C6503 and the Cisco WS-C6503-E switch have three horizontal slots being numbered from 1 (top) to 3 (bottom)
 
<br/>
 
<br/>
  
'''Supported supervisor engines in the Cisco6503 router'''
+
'''Supported supervisor engines in the Cisco WS-C6503 switch'''
 
<br/>
 
<br/>
 
*Supports Supervisor Engine 2
 
*Supports Supervisor Engine 2
*Supervisor Engine 32
+
** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-X6K-S2-PFC2]]<br/>
*Supervisor Engine 720.
+
** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-X6K-S2-MSFC2]] <br/>
 +
** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-X6K-S2U-MSFC2]] <br/>
 +
 
 +
*Supervisor Engine 32  
 +
**WS-SUP32-GE-3B
 +
**WS-SUP32-10GE-3B
 +
**WS-S32-GE-PISA
 +
**WS-S32P-10GE-PISA
 +
 
 +
*Supervisor Engine 720
 +
** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-SUP720]] <br/>
 +
** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-SUP720-3B]] <br/>
 +
** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-SUP720-3BXL]] <br/>
 +
** VS-S720-10G-3C
 +
** VS-S720-10G-3CXL
 
<br/>
 
<br/>
 
'''''Note:''''' Redundant supervisor engines must be configured identically.
 
'''''Note:''''' Redundant supervisor engines must be configured identically.
 
<br/><br/>
 
<br/><br/>
'''Supported supervisor engines in the Cisco6503-E router'''
+
'''Supported supervisor engines in the Cisco WS-C6503-E switch'''
<br/>
 
 
*Supports Supervisor Engine 2
 
*Supports Supervisor Engine 2
*Supervisor Engine 32
+
** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-X6K-S2-PFC2]]<br/>
*Supervisor Engine 720.
+
** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-X6K-S2-MSFC2]] <br/>
 +
** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-X6K-S2U-MSFC2]] <br/>
 +
 
 +
*Supervisor Engine 32  
 +
**WS-SUP32-GE-3B
 +
**WS-SUP32-10GE-3B
 +
**WS-S32-GE-PISA
 +
**WS-S32P-10GE-PISA
 +
 
 +
*Supervisor Engine 720
 +
** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-SUP720]] <br/>
 +
** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-SUP720-3B]] <br/>
 +
** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-SUP720-3BXL]] <br/>
 +
** VS-S720-10G-3C <br/>
 +
** VS-S720-10G-3CXL <br/>
 
<br/>
 
<br/>
 
'''''Note:''''' Redundant supervisor engines must be configured identically.
 
'''''Note:''''' Redundant supervisor engines must be configured identically.
 
<br/><br/>
 
<br/><br/>
==Fan trys ==
+
 
'''Supported Fan trays in the 6503 series'''
+
==Fan trays ==
*Standard Fan try
+
'''Supported Fan trays in the WS-C6503 series'''
 +
*Standard Fan tray
 
**FAN-MOD-3  
 
**FAN-MOD-3  
 
*High-speed fan tray
 
*High-speed fan tray
 
**FAN-MOD-3HS
 
**FAN-MOD-3HS
 
<br/>
 
<br/>
'''''Note''''' Both fan tray models contain four individual fans. The individual fans are not field replaceable; you must replace the fan tray.
+
'''''Note''''' The standard fan tray will only support WS-X6K-S2-PFC2, WS-X6K-S2-MSFC2 and WS-X6K-S2U-MSFC2. Supervisor Engin 32 and 720 will need a high-speed fan tray
 
<br/><br/>
 
<br/><br/>
'''Supported Fan trays in the 6503-E series'''
+
'''Supported Fan trays in the WS-C6503-E series'''
*WS-C6503-E-FAN—282 CFM
+
*WS-C6503-E-FAN
 
<br/>
 
<br/>
'''''Note''''' The fan tray contains four individual fans. The individual fans are not field replaceable; you must replace the fan tray.
+
'''''Note:''''' The WS-C6503-E-Fan ist a high-speed fan tray.  
<br/><br/>
+
 
  
 
==Power supplies and power entry modules==
 
==Power supplies and power entry modules==
Both, the Cisco 6503 and the Cisco 6503-E router have two power supply slots on the back of the chassis, with the power supply 1 being installed on the bottom and the optional redundant power supply 2 being installed in the upper of the two slots.<br/>
+
Both, the Cisco WS-C6503 and the Cisco WS-C6503-E switch have two power supply slots on the back of the chassis, with the power supply 1 being installed on the bottom and the optional redundant power supply 2 being installed in the upper of the two slots.<br/>
  
'''Supported spower supplies in the Cisco 6503 router'''<br/>
+
'''Supported spower supplies in the Cisco WS-C6503 switch'''<br/>
 
* 950 W AC-input power supply
 
* 950 W AC-input power supply
 
**PWR-950-AC  
 
**PWR-950-AC  
Line 50: Line 82:
 
''!!! Note: the power entry module '''PEM-20A-AC+''' is needed when using a PWR-1400-AC. You need one '''PEM-20A-AC+''' per PWR-1400-AC.<br/>''
 
''!!! Note: the power entry module '''PEM-20A-AC+''' is needed when using a PWR-1400-AC. You need one '''PEM-20A-AC+''' per PWR-1400-AC.<br/>''
 
<br/><br/>
 
<br/><br/>
'''Supported spower supplies in the Cisco 6503-E router'''<br/>
+
'''Supported spower supplies in the Cisco WS-C6503-E switch'''<br/>
 
* 950 W AC-input power supply
 
* 950 W AC-input power supply
 
**PWR-950-AC  
 
**PWR-950-AC  

Latest revision as of 12:01, 15 July 2009

Video Datasheet

Cisco Catalyst 6503-E Datasheet

Supervisor engines

WS-C6503-E front
WS-C6503-E rear

Both, the Cisco WS-C6503 and the Cisco WS-C6503-E switch have three horizontal slots being numbered from 1 (top) to 3 (bottom)

Supported supervisor engines in the Cisco WS-C6503 switch

  • Supervisor Engine 32
    • WS-SUP32-GE-3B
    • WS-SUP32-10GE-3B
    • WS-S32-GE-PISA
    • WS-S32P-10GE-PISA


Note: Redundant supervisor engines must be configured identically.

Supported supervisor engines in the Cisco WS-C6503-E switch

  • Supervisor Engine 32
    • WS-SUP32-GE-3B
    • WS-SUP32-10GE-3B
    • WS-S32-GE-PISA
    • WS-S32P-10GE-PISA


Note: Redundant supervisor engines must be configured identically.

Fan trays

Supported Fan trays in the WS-C6503 series

  • Standard Fan tray
    • FAN-MOD-3
  • High-speed fan tray
    • FAN-MOD-3HS


Note The standard fan tray will only support WS-X6K-S2-PFC2, WS-X6K-S2-MSFC2 and WS-X6K-S2U-MSFC2. Supervisor Engin 32 and 720 will need a high-speed fan tray

Supported Fan trays in the WS-C6503-E series

  • WS-C6503-E-FAN


Note: The WS-C6503-E-Fan ist a high-speed fan tray.


Power supplies and power entry modules

Both, the Cisco WS-C6503 and the Cisco WS-C6503-E switch have two power supply slots on the back of the chassis, with the power supply 1 being installed on the bottom and the optional redundant power supply 2 being installed in the upper of the two slots.

Supported spower supplies in the Cisco WS-C6503 switch

  • 950 W AC-input power supply
    • PWR-950-AC

!!! Note: the power entry module PEM-15A-AC is needed when using a PWR-950-AC. You need one PEM-15A-AC per PWR-950-AC.

  • 950 W DC-input power supply
    • PWR-950-DC

!!! Note: the power entry module PEM-DC/3 is needed when using a PWR-950-DC. You need one PEM-DC/3 per PWR-950-DC.

  • 1400 W AC-input power supply
    • PWR-1400-AC

!!! Note: the power entry module PEM-20A-AC+ is needed when using a PWR-1400-AC. You need one PEM-20A-AC+ per PWR-1400-AC.


Supported spower supplies in the Cisco WS-C6503-E switch

  • 950 W AC-input power supply
    • PWR-950-AC

!!! Note: the power entry module PEM-15A-AC is needed when using a PWR-950-AC. You need one PEM-15A-AC per PWR-950-AC.

  • 950 W DC-input power supply
    • PWR-950-DC

!!! Note: the power entry module PEM-DC/3 is needed when using a PWR-950-DC. You need one PEM-DC/3 per PWR-950-DC.

  • 1400 W AC-input power supply
    • PWR-1400-AC

!!! Note: the power entry module PEM-20A-AC+ is needed when using a PWR-1400-AC. You need one PEM-20A-AC+ per PWR-1400-AC.