Catalyst 5000 - Switching Fabric Only Supervisors

From NesevoWiki
Revision as of 15:18, 24 September 2008 by Florian (talk | contribs)
Jump to navigationJump to search

Catalyst 5000 - Switching Fabric Only Supervisors

Feature Supervisor I Supervisor II Supervisor IIG
Chassis Support 5000, 5002 All All
Redundant Supervisors No Yes Yes
Processor 25MHz Motorola MC68EC040 25MHz Motorola MC68EC040 37.5MHz Motorola MCF5102
Modular NFFC-II No No Integrated
Modular RSFC No No Yes
Fixed Uplinks (2)100BaseTX (2)100BaseTX (2)100BaseFX (2)100BaseFX None
Modular Uplinks None None (4)100BaseTX (4)100BaseFX (2)1000BaseSX (2)1000BaseLX
Backplane Connection 1.2 Gbps 1.2 Gbps 1.2 Gbps
PCMCIA Flash No No No
Default Flash 4 MB 8 MB 8 MB
Default DRAM 20 MB 32 MB 32 MB
NVRAM 256 KB 256 KB 512 KB
Console Port DB-25 DB-25 RJ-45
Auxiliary Port No No RJ-45
FE Management Interface Yes Yes Yes
EtherChannel on Uplinks No FEC FEC
Max # of MAC Addresses 16000 16000 16000
Max VLANs 1024 1024 1024
Dimensions (H/W/D) 1.2 x 14.4 x 16 in. (3 x 35.6 x 40.6 cm) 1.2 x 14.4 x 16 in. (3 x 35.6 x 40.6 cm) 1.2 x 14.4 x 16 in. (3 x 35.6 x 40.6 cm)
Operating Temperature Range 32 to 104° F (0 to 40° C) 32 to 104° F (0 to 40° C) 32 to 104° F (0 to 40° C)
Storage Temperature Range -40 to 167° F (-40 to 75° C) -40 to 167° F (-40 to 75° C) -40 to 167° F (-40 to 75° C)
Relative Humidity 10% to 90%, noncondensing 10% to 90%, noncondensing 10% to 90%, noncondensing



Note: Older versions of the Supervisor III came with NFFC's or NFFC-II's, instead of the newer NFFC-A and NFFC-IIA's. Some even older ones even came without a NFFC at all, and these models were quickly EOS'd. Gigabit Etherchannel is not supported on any Supervisor, and never will. GEC is only supported on the 9-port GE line card (WS-X5410).