Applying a configuration file to a Fortinet FortiAnalyzer device

From NesevoWiki
Jump to navigationJump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.


  • General assumption: The device is configured according to factory defaults.
  • Connect to the serial console of the device (just like to a Cisco device, same serial port settings)
  • Log in using username admin and no password (just hit ENTER).
  • Connect your computer's network port to network port 1 of the device. Configure your computer's NIC to use a static IP address in the 192.168.1.0/24 subnet (e.g. 192.168.1.100/255.255.255.0).
  • Access the device's web interface on https://192.168.1.99 and log in with the same credentials as above.

TBD

Retrieved from "http://wiki.nesevo.com/index.php?title=Applying_a_configuration_file_to_a_Fortinet_FortiAnalyzer_device&oldid=2718"