Applying a configuration file to a AIRONET WLAN Access Point
From NesevoWiki
Jump to navigationJump to searchThe printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
- Connect to the device via serial console
- If it asks for a username, the default is
cisco
with passwordCisco
- At the command prompt, type
enable
- Enter the enable password, the default is
Cisco
- Paste in the configuration commands
- Save it by typing
reload
. No explicit saving necessary. - You can check the IP configuration of the AP by typing
show capwap ip config