Applying a configuration file to a AIRONET WLAN Access Point

From NesevoWiki
Revision as of 15:52, 1 March 2016 by Philipp (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
  • Connect to the device via serial console
  • If it asks for a username, the default is cisco with password Cisco
  • At the command prompt, type enable
  • Enter the enable password, the default is Cisco
  • Paste in the configuration commands
  • Save it by typing reload. No explicit saving necessary.
  • You can check the IP configuration of the AP by typing show capwap ip config
Retrieved from "http://wiki.nesevo.com/index.php?title=Applying_a_configuration_file_to_a_AIRONET_WLAN_Access_Point&oldid=2696"