Applying a configuration file to a 25XX WLAN controller

From NesevoWiki
Jump to navigationJump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
  • General Assunption: Device is unconfigured
  • Connect device to serial console
  • Connect device to network (port 1)
  • Finish basic config wizard on console as described here
  • Put the config file you want to apply into your TFTP server's root directory

Apply config via browser interface

  • Connect to device's static IP address via https
  • Log in using credentials used in config wizard
  • Click Advanced in top left corner
  • Click Commands, then Download File
    • File Type: Configuration
    • Configuration File Encryption: No
    • Transfer Mode: TFTP
    • IP Address: 192.168.1.11
    • Maximum retries: 10
    • Timeout (seconds): 6
    • File Path: /
    • File Name: whatever.cfg
  • Click Download
  • Config file will be loaded onto the device, applied and system reset

Apply config via command line interface

  • Connect to the serial console and log in
  • transfer download datatype config
  • transfer download mode tftp
  • transfer download serverip 192.168.1.11
  • transfer download path .
  • transfer download filename configfile.conf
  • transfer download start
Retrieved from "http://wiki.nesevo.com/index.php?title=Applying_a_configuration_file_to_a_25XX_WLAN_controller&oldid=2668"