Loading IOS on a switch or router via the console

From NesevoWiki
Revision as of 12:12, 12 March 2009 by Roberto (talk | contribs)
Jump to navigationJump to search

If the flash has been deleted / formated and there is no IOS on the switch or router, you have to copy the new IOS via the console port.

All you have to do is to type: copy xmodem:new_file.bin flash:new_file.bin and hit return in the rommon or enable mode.

On the Hyper Terminal Menu bar, click Transfer and choose Send File.

Issue the dir flash: command in order to verify the successful copy of the file to the Flash:

Set the BOOT parameters so that the switch boots with the downloaded image when reloaded: e.g. / switch: set BOOT flash:c2900xl-c3h2s-mz.120-5.WC8.bin

Boot the switch: switch: boot

Reload the switch in order to make sure that the switch boots up properly: switch#reload

This might take very very long or even very very very very long depening on the size of the IOS you are loading.

Retrieved from "http://wiki.nesevo.com/index.php?title=Loading_IOS_on_a_switch_or_router_via_the_console&oldid=843"