Catalyst 5000 - Switching Fabric Only Supervisors
From NesevoWiki
Jump to navigationJump to search
Catalyst 5000 - Switching Fabric Only Supervisors
Feature | Supervisor I | Supervisor II | Supervisor IIG |
Chassis Support | 5000, 5002 | All | All |
Redundant Supervisors | No | Yes | Yes |
Processor | 25MHz Motorola MC68EC040 | 25MHz Motorola MC68EC040 | 37.5MHz Motorola MCF5102 |
Modular NFFC-II | No | No | Integrated |
Modular RSFC | No | No | Yes |
Fixed Uplinks | (2)100BaseTX (2)100BaseTX | (2)100BaseFX (2)100BaseFX | None |
Modular Uplinks | None | None | (4)100BaseTX (4)100BaseFX (2)1000BaseSX (2)1000BaseLX |
Backplane Connection | 1.2 Gbps | 1.2 Gbps | 1.2 Gbps |
PCMCIA Flash | No | No | No |
Default Flash | 4 MB | 8 MB | 8 MB |
Default DRAM | 20 MB | 32 MB | 32 MB |
NVRAM | 256 KB | 256 KB | 512 KB |
Console Port | DB-25 | DB-25 | RJ-45 |
Auxiliary Port | No | No | RJ-45 |
FE Management Interface | Yes | Yes | Yes |
EtherChannel on Uplinks | No | FEC | FEC |
Max # of MAC Addresses | 16000 | 16000 | 16000 |
Max VLANs | 1024 | 1024 | 1024 |
Dimensions (H/W/D) | 1.2 x 14.4 x 16 in. (3 x 35.6 x 40.6 cm) | 1.2 x 14.4 x 16 in. (3 x 35.6 x 40.6 cm) | 1.2 x 14.4 x 16 in. (3 x 35.6 x 40.6 cm) |
Operating Temperature Range | 32 to 104° F (0 to 40° C) | 32 to 104° F (0 to 40° C) | 32 to 104° F (0 to 40° C) |
Storage Temperature Range | -40 to 167° F (-40 to 75° C) | -40 to 167° F (-40 to 75° C) | -40 to 167° F (-40 to 75° C) |
Relative Humidity | 10% to 90%, noncondensing | 10% to 90%, noncondensing | 10% to 90%, noncondensing |
Note:' Older versions of the Supervisor III came with NFFC's or NFFC-II's, instead of the newer NFFC-A and
NFFC-IIA's. Some even older ones even came without a NFFC at all, and these models were quickly EOS'd.
Gigabit Etherchannel is not supported on any Supervisor, and never will. GEC is only supported on the 9-port
GE line card (WS-X5410).