Cisco 6513
From NesevoWiki
Jump to navigationJump to search
The Catalyst 6513 switch is a 13-slot horizontal chassis supporting redundant power supplies, redundant supervisor engines, and slots for up to twelve modules
Supervisor engines
- Supervisor Engine 2
- Supervisor Engine 2 is installed in slot 1 and slot 2.
- Supervisor Engine 32 and Supervisor Engine 720.
- Supervisor Engine 32 and Supervisor Engine 720 are installed in slot 7 and slot 8.
- Supervisor Engine 32 and Supervisor Engine 720 require that you install the high-speed fan tray. You must also install a 2500 W or higher capacity power supply in the chassis to power the high-speed fan tray.
- Supervisor Engine 32 does not support the Switch Fabric Modules.
- Supervisor Engine 720 has built-in switching fabric. Switch Fabric Modules are not supported by Supervisor Engine 720 and cannot be installed in the same chassis.
Power supplies and power entry modules
Supported power supplies in the Cisco 6513 router
- 2500 W AC-input power supply
- WS-CAC-2500W
- 2500 W DC-input power supply
- WS-CDC-2500W
- 3000 W AC-input power supply
- WS-CAC-3000W
- 4000 W AC-input power supply
- WS-CAC-4000W-US
- 4000 W AC-input power supply
- WS-CAC-4000W-INT
- 4000 W DC-input power supply
- PWR-4000-DC
- 6000 W AC-input power supply
- WS-CAC-6000W
- 8700 W AC-input power supply
- WS-CAC-8700W-E
Note The 8700 W power supply is limited to 6000 W maximum output when installed in the Catalyst 6513 switch chassis.
Fan trys
- Standard fan tray
- WS-C6K-13SLOT-FAN
- High-speed fan tray
- WS-C6K-13SLT-FAN2
Note: Both fan tray models contain 15 individual fans. The individual fans are not field replaceable; you must replace the fan tray.