Loading JunOS on an MX series router

From NesevoWiki
Revision as of 16:52, 19 December 2016 by Philipp (talk | contribs)
Jump to navigationJump to search
  • See JunOS knowledge base: https://kb.juniper.net/InfoCenter/index?page=content&id=KB11409
  • Put the jinstall-*.tgz file on a FAT32 formatted USB drive and place it in the router's USB port
  • Connect to the router's console as root user
  • Start a shell session: start shell</codde>
  • Create a temporary folder and mount the USB drive:
    • mkdir /mnt/usb
    • mount -t msdosfs /dev/da1s1 /mnt/usb
  • Copy the jinstall file to the local file system: cp /mnt/usb/jinstall-ppc-14.2R7.5-domestic-signed.tgz /var/tmp/
  • Unmount the USB drive and disconnect it: umount /mnt/usb
Retrieved from "http://wiki.nesevo.com/index.php?title=Loading_JunOS_on_an_MX_series_router&oldid=2737"