Applying a configuration file to a AIRONET WLAN Access Point

From NesevoWiki
Revision as of 12:02, 25 January 2016 by Philipp (talk | contribs) (Created page with "* Connect to the device via serial console * At the command prompt, type <code>enable</code> * Enter the enable password, the default is <code>Cisco</code> * Paste in the conf...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
  • Connect to the device via serial console
  • At the command prompt, type enable
  • Enter the enable password, the default is Cisco
  • Paste in the configuration commands
  • Save it by typing reload. No explicit saving necessary.
Retrieved from "http://wiki.nesevo.com/index.php?title=Applying_a_configuration_file_to_a_AIRONET_WLAN_Access_Point&oldid=2694"