Loading IOS on a ME-3400G-12CS-A Switch

Step 1:

Switch(config):interface GigabitEthernet0/13

Switch(config-if):port-type eni

Switch(config-if):exit

Switch(config):interface GigabitEthernet0/12

Switch(config-if):port-type nni

Switch(config-if):exit

Switch(config):interface Vlan1

Switch(config-if):ip address 192.168.0.227 255.255.255.0

Switch(config-if):no ip route-cache

Switch(config-if):end

Switch(config):interface gigabitEthernet 0/12

Switch(config-if):no shut

Step 2:

Switch#ping 192.168.0.127

Sending 5, 100-byte ICMP Echos to 192.168.0.127, timeout is 2 seconds: !!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 1/203/1007 ms

Step 3:

Switch#format flash:

Format operation may take a while. Continue? [confirm]

Format operation will destroy all data in "flash:". Continue? [confirm]

flashfs[1]: 0 files, 1 directories

flashfs[1]: 0 orphaned files, 0 orphaned directories

flashfs[1]: Total bytes: 32514048

flashfs[1]: Bytes used: 1024

flashfs[1]: Bytes available: 32513024

flashfs[1]: flashfs fsck took 8 seconds.

Format of flash complete

Step 4:

copy from tftp to flash

switch#copy tftp: flash: Address or name of remote host []? 192.168.0.127

Source filename []? me340x-metroipaccessk9-mz.122-55.SE.bin

Destination filename [me340x-metroipaccessk9-mz.122-55.SE.bin]?

Accessing tftp://192.168.0.127/me340x-metroipaccessk9-mz.122-55.SE.bin...

Loading me340x-metroipaccessk9-mz.122-55.SE.bin from 192.168.0.127 (via Vlan1): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!O!!!!!!!!!!!!!! [OK - 12619566 bytes]

12619566 bytes copied in 171.447 secs (73606 bytes/sec)

Switch#

Step 5:

delete the config

Switch#wr erase

Erasing the nvram filesystem will remove all files! Continue? [confirm] hit enter [OK]

Erase of nvram: complete

Switch#

Step 6:

reload

Switch#reload

System configuration has been modified. Save? [yes/no]: no

Proceed with reload? [confirm] hit enter