Loading IOS on an ASR 1001 Router

From NesevoWiki
Revision as of 14:28, 11 February 2015 by Philipp (talk | contribs) (Created page with "* Cabling ** Connect to the serial console ** Connect the MGMT interface to your LAN * Configuration via Serial Console ** Quit the config dialogue ** Configure Interface <cod...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
  • Cabling
    • Connect to the serial console
    • Connect the MGMT interface to your LAN
  • Configuration via Serial Console
    • Quit the config dialogue
    • Configure Interface GigabitEthernet 0 (that's the MGMT Interface, actually) to a static address in your LAN and un-shut it.
    • Check if it works: ping vrf Mgmt-intf 192.168.1.11
    • Copy the new IOS file via TFTP (SCP doesn't work) to bootflash: copy tftp: bootflash:
    • Unset the BOOT variable (in conf mode): no boot system
    • Set the BOOT variable to the new image (in conf mode): boot system flash bootflash:asr1001-universalk9.03.08.01.S.153-1.S1.bin
    • write memory and reload
Retrieved from "http://wiki.nesevo.com/index.php?title=Loading_IOS_on_an_ASR_1001_Router&oldid=2638"