Factory Reset on Cisco WiFi Access Points

From NesevoWiki
Revision as of 12:32, 30 June 2021 by Lager (talk | contribs) (on request by philipp and eddic, i made this ad-hocly)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

AIR-AP2802I-E-K9

This Process is the same for both IOS and ClickOS APs.

  • Disconnect power from AP.
  • Press and hold "Mode button" on AP and provide power to AP. Note that some Access-Points do not have a regular DC-Power-Connector but need to be powered through a Ethernet Cable that is connected to a PoE Switch-Port.
  • Keep mode button hold for 20 seconds or more. A message like the following appears:
Button is pressed. Configuration reset activated.. 
Keep the button pressed for > 20 seconds for full reset 

Wait for the button to be released .... 
Button pressed for 22 seconds
  • Username, Login- and Enable-Passsword are now all "Cisco"

Source: https://www.cisco.com/c/en/us/support/docs/wireless/aironet-1200-series/99763-reset-lwappconfig-lap.html

Retrieved from "http://wiki.nesevo.com/index.php?title=Factory_Reset_on_Cisco_WiFi_Access_Points&oldid=2933"