Loading IOS on a WS-C2960X Switch Stack

From NesevoWiki
Revision as of 09:14, 17 June 2015 by Philipp (talk | contribs)
Jump to navigationJump to search
  • Connect ("daisy-chain") all stack members with stacking cables as shown here: WS-C2960X Stacking Guide
  • Power on all stack members
  • Connect one switch to your network (via the Mgmt interface)
  • Connect to the serial console of the same switch
  • Configure the Mgmt interface (FastEthernet 0)
  • Check connectivity: ping 192.168.1.11
  • Install the nwew IOS firmware on all stack mambers simultaneously using this command:
    • archive download-sw /force-reload /overwrite tftp://192.168.1.11/c2960x-universalk9-tar.150-2a.EX5.tar
  • Important: You must use the .tar version of the IOS image, the .bin version won't work with the archive download-sw command.
Retrieved from "http://wiki.nesevo.com/index.php?title=Loading_IOS_on_a_WS-C2960X_Switch_Stack&oldid=2684"