How to connect with the Nesevo lab

From NesevoWiki
Revision as of 14:47, 12 January 2012 by Stephan (talk | contribs) (→‎Putty:)
Jump to navigationJump to search

Putty:

Step 1: Download PuTTY

Step 2: choose the following IP- Address: 91.112.121.84 20XX (port# to be given)

Step 3: Choose Telnet as protocol and enter the portnumber provided by your nesevo contact.

Step 4: Conect with the Router.

Step 5: Enter the password provided to get access.

APC:

Step 1: Enter following IP- Address: 91.112.121.83

Step 2: To log in type following userdate in:

  username: NesevoLab 
  password: 

Step 3: To power up your device enter the "Device Manger" and choose the "Control" point.

Apc-zugang.jpg

  * Choose point one to power up your device immedialy.
  * Choose point two to power up your device delayed.
  * Choose point three to turn off your device immedialy.
  * Choose point four to turn off your device delayed.
  * Choose point five to reboot your device immedialy.
  * Choose point six to reboot your device delayed.
  * Choose point seven to cancle pending commands.