Cisco Catalyst 6506 and Cisco 6506-E

From NesevoWiki
Revision as of 17:24, 25 February 2010 by Roberto (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Video Datasheet

Cisco Catalyst 6506-E Datasheet

Supervisor engines

Both, The Cisco Catalyst 6506 switch and the Cisco Catalyst 6506-E switch have 6-slot horizontal slots and being nummbered from 1 (botton) to 6 (top) and measure 7 rack units (7RU).
While the supported supervisor engine 2 (see below) is installed in slot 1 and an optional redundant supervisor engine 2 in slot 2, the supported supervisor engine 720 and supervisor engine 32 are installed in slot 5 (first supervisor engine)and slot 6 (optional redundant supervisor engine).
!!! Note: When installing a redundant supervisor engine, both supervisor engines must be identical.
!!! Note: The GBIC uplink ports are fully functional on the redundant supervisor engine in stand by.
If a redundant supervisor engine is not required, all free slots can be equipped with any supported cisco7600 series / catalyst 6500 series module.
Supported supervisor engines in the Cisco WS-C6506 switch

Note: Supervisor Engine 2 is installed in slot 1 or slot 2. Supervisor Engine 32 and Supervisor Engine 720 are installed in slot 5 or slot 6.


Note: Redundant supervisor engines must be configured identically.

Supported supervisor engines in the Cisco WS-C6506-E switch


Note: Redundant supervisor engines must be configured identically.

Fan trays

Supported Fan trays in the WS-C6506 series

  • Standard fan tray
    • WS-C6K-6SLOT-FAN
  • High- Speed fan tray
    • WS-C6K-6SLOT-FAN2


Note The standard fan tray will only support WS-X6K-S2-PFC2, WS-X6K-S2-MSFC2 and WS-X6K-S2U-MSFC2. Supervisor Engin 32 and 720 will need a high-speed fan tray

Supported Fan trys in the WS-C6506-E series

  • one hot-swappable fan tray
    • WS-C6506-E-FAN


Note: The WS-C6506-E-FAN is a high-speed fan tray.

Power supplies

Both, the Cisco WS-C6506 and the Cisco 6506-E switch have two power supply slots on the back of the chassis, with the power supply 1 being installed on the bottom and the optional redundant power supply 2 being installed in the upper of the two slots.

Supported spower supplies in the Cisco WS-C6506 switch

  • 1000 W AC-input power supply
    • WS-CAC-1000W
  • 1300 W AC-input power supply
    • WS-CAC-1300W
  • 1300 W DC-input power supply
    • WS-CDC-1300W
  • 2500 W AC-input power supply
    • WS-CAC-2500W
  • 2500 W DC-input power supply
    • WS-CDC-2500W
  • 3000 W AC-input power supply
    • WS-CAC-3000W
  • 4000 W AC-input power supply
    • WS-CAC-4000W-US
  • 4000 W AC-input power supply
    • WS-CAC-4000W-INT
  • 4000 W DC-input power supply
    • PWR-4000-DC
  • 6000 W AC-input power supply
    • WS-CAC-6000W
  • 8700 W AC-input power supply
    • WS-CAC-8700W


Supported spower supplies in the Cisco WS-C6506-E switch

  • 2500 W AC-input power supply
    • WS-CAC-2500W
  • 2500 W DC-input power supply
    • WS-CDC-2500W
  • 3000 W AC-input power supply
    • WS-CAC-3000W
  • 4000 W AC-input power supply
    • WS-CAC-4000W-US
  • 4000 W AC-input power supply
    • WS-CAC-4000W-INT
  • 4000 W DC-input power supply
    • PWR-4000-DC
  • 6000 W AC-input power supply
    • WS-CAC-6000W
  • 8700 W AC-input power supply
    • WS-CAC-8700W-E
Retrieved from "http://wiki.nesevo.com/index.php?title=Cisco_Catalyst_6506_and_Cisco_6506-E&oldid=1365"