Difference between revisions of "Cisco 6503 and Cisco 6503-E"
| Line 20: | Line 20: | ||
<br/><br/> | <br/><br/> | ||
==Fan trys == | ==Fan trys == | ||
| − | '''Supported Fan | + | '''Supported Fan trays in the 6503 series''' |
*Standard Fan try | *Standard Fan try | ||
**FAN-MOD-3 | **FAN-MOD-3 | ||
| − | *High-speed fan | + | *High-speed fan tray |
**FAN-MOD-3HS | **FAN-MOD-3HS | ||
<br/> | <br/> | ||
'''''Note''''' Both fan tray models contain four individual fans. The individual fans are not field replaceable; you must replace the fan tray. | '''''Note''''' Both fan tray models contain four individual fans. The individual fans are not field replaceable; you must replace the fan tray. | ||
<br/><br/> | <br/><br/> | ||
| − | '''Supported Fan | + | '''Supported Fan trays in the 6503-E series''' |
*WS-C6503-E-FAN—282 CFM | *WS-C6503-E-FAN—282 CFM | ||
<br/> | <br/> | ||
'''''Note''''' The fan tray contains four individual fans. The individual fans are not field replaceable; you must replace the fan tray. | '''''Note''''' The fan tray contains four individual fans. The individual fans are not field replaceable; you must replace the fan tray. | ||
<br/><br/> | <br/><br/> | ||
| + | |||
==Power supplies and power entry modules== | ==Power supplies and power entry modules== | ||
Both, the Cisco 6503 and the Cisco 6503-E router have two power supply slots on the back of the chassis, with the power supply 1 being installed on the bottom and the optional redundant power supply 2 being installed in the upper of the two slots.<br/> | Both, the Cisco 6503 and the Cisco 6503-E router have two power supply slots on the back of the chassis, with the power supply 1 being installed on the bottom and the optional redundant power supply 2 being installed in the upper of the two slots.<br/> | ||
Revision as of 10:19, 20 August 2008
Supervisor engines
Both, the Cisco6503 and the Cisco6503-E router have three horizontal slots being numbered from 1 (top) to 3 (bottom)
Supported supervisor engines in the Cisco6503 router
- Supports Supervisor Engine 2
- Supervisor Engine 32
- Supervisor Engine 720.
Note: Redundant supervisor engines must be configured identically.
Supported supervisor engines in the Cisco6503-E router
- Supports Supervisor Engine 2
- Supervisor Engine 32
- Supervisor Engine 720.
Note: Redundant supervisor engines must be configured identically.
Fan trys
Supported Fan trays in the 6503 series
- Standard Fan try
- FAN-MOD-3
- High-speed fan tray
- FAN-MOD-3HS
Note Both fan tray models contain four individual fans. The individual fans are not field replaceable; you must replace the fan tray.
Supported Fan trays in the 6503-E series
- WS-C6503-E-FAN—282 CFM
Note The fan tray contains four individual fans. The individual fans are not field replaceable; you must replace the fan tray.
Power supplies and power entry modules
Both, the Cisco 6503 and the Cisco 6503-E router have two power supply slots on the back of the chassis, with the power supply 1 being installed on the bottom and the optional redundant power supply 2 being installed in the upper of the two slots.
Supported spower supplies in the Cisco 6503 router
- 950 W AC-input power supply
- PWR-950-AC
!!! Note: the power entry module PEM-15A-AC is needed when using a PWR-950-AC. You need one PEM-15A-AC per PWR-950-AC.
- 950 W DC-input power supply
- PWR-950-DC
!!! Note: the power entry module PEM-DC/3 is needed when using a PWR-950-DC. You need one PEM-DC/3 per PWR-950-DC.
- 1400 W AC-input power supply
- PWR-1400-AC
!!! Note: the power entry module PEM-20A-AC+ is needed when using a PWR-1400-AC. You need one PEM-20A-AC+ per PWR-1400-AC.
Supported spower supplies in the Cisco 6503-E router
- 950 W AC-input power supply
- PWR-950-AC
!!! Note: the power entry module PEM-15A-AC is needed when using a PWR-950-AC. You need one PEM-15A-AC per PWR-950-AC.
- 950 W DC-input power supply
- PWR-950-DC
!!! Note: the power entry module PEM-DC/3 is needed when using a PWR-950-DC. You need one PEM-DC/3 per PWR-950-DC.
- 1400 W AC-input power supply
- PWR-1400-AC
!!! Note: the power entry module PEM-20A-AC+ is needed when using a PWR-1400-AC. You need one PEM-20A-AC+ per PWR-1400-AC.
