Difference between revisions of "Password recovery & checking / installing licenses"
From NesevoWiki
Jump to navigationJump to search| Line 4: | Line 4: | ||
* Enter configuration mode; at the system prompt, enter the configure terminal command:<code>amnesiac # configure terminal</code> | * Enter configuration mode; at the system prompt, enter the configure terminal command:<code>amnesiac # configure terminal</code> | ||
* View current and available model specifications; enter the show hardware spec command: | * View current and available model specifications; enter the show hardware spec command: | ||
| − | + | <code>amnesiac (config) # show hardware spec</code> | |
| − | + | Spec Description | |
| − | + | - ---------- ---------------------------------------------------------------------- | |
| − | + | 1050_LR BW Limit: 8000 Kb/s Connection Limit: 800 | |
| − | - ------ ---------------------------------------------------------------------- | + | (activation requires hardware) |
| − | + | 1050_MR BW Limit: 10000 Kb/s Connection Limit: 1300 | |
| − | + | (activation requires hardware) | |
| − | + | * 1050H BW Limit: 20000 Kb/s Connection Limit: 2300 | |
| − | + | (activation requires hardware) | |
| − | + | 1050_HR BW Limit: 20000 Kb/s Connection Limit: 2300 | |
| + | (activation requires hardware) | ||
* = active | * = active | ||
<br> | <br> | ||
* Install the model upgrade license; enter the license install <license-key> command: <br> | * Install the model upgrade license; enter the license install <license-key> command: <br> | ||
| − | <code>amnesiac (config) # license install LIC-EXAMPLE- | + | <code>amnesiac (config) # license install LIC-EXAMPLE-1050H-0000-0000-0-000X-0XX0</code> |
| − | * | + | * Write the model upgrade license to memory; enter the write memory command: |
| − | * the <code> | + | <code>amnesiac (config) # write memory</code> |
| + | * View licenses installed on the appliance; enter the show licenses command: | ||
| + | <code>amnesiac (config) # show licenses</code> | ||
| + | LIC-EXAMPLE-1050H-0000-0000-0-000X-0XX0 | ||
| + | Index: 6 | ||
| + | Feature: MSPECEX1050H | ||
| + | Valid: yes | ||
| + | Active: yes | ||
| + | <br> | ||
Revision as of 12:03, 21 December 2017
- Connect to the Riverbed CLI
- Enter enable mode; at the system prompt, enter the enable command:
amnesiac > enable - Enter configuration mode; at the system prompt, enter the configure terminal command:
amnesiac # configure terminal - View current and available model specifications; enter the show hardware spec command:
amnesiac (config) # show hardware spec
Spec Description
- ---------- ----------------------------------------------------------------------
1050_LR BW Limit: 8000 Kb/s Connection Limit: 800
(activation requires hardware)
1050_MR BW Limit: 10000 Kb/s Connection Limit: 1300
(activation requires hardware)
* 1050H BW Limit: 20000 Kb/s Connection Limit: 2300
(activation requires hardware)
1050_HR BW Limit: 20000 Kb/s Connection Limit: 2300
(activation requires hardware)
* = active
- Install the model upgrade license; enter the license install <license-key> command:
amnesiac (config) # license install LIC-EXAMPLE-1050H-0000-0000-0-000X-0XX0
- Write the model upgrade license to memory; enter the write memory command:
amnesiac (config) # write memory
- View licenses installed on the appliance; enter the show licenses command:
amnesiac (config) # show licenses
LIC-EXAMPLE-1050H-0000-0000-0-000X-0XX0
Index: 6
Feature: MSPECEX1050H
Valid: yes
Active: yes
