Difference between revisions of "Loading JunOS on an MX series router"
From NesevoWiki
Jump to navigationJump to search| Line 2: | Line 2: | ||
* Put the <code>jinstall-*.tgz</code> file on a FAT32 formatted USB drive and place it in the router's USB port | * Put the <code>jinstall-*.tgz</code> file on a FAT32 formatted USB drive and place it in the router's USB port | ||
* Connect to the router's console as <code>root</code> user | * Connect to the router's console as <code>root</code> user | ||
| − | * Start a shell session: <code>start shell</ | + | * Start a shell session: <code>start shell</code> |
* Create a temporary folder and mount the USB drive: | * Create a temporary folder and mount the USB drive: | ||
** <code>mkdir /mnt/usb</code> | ** <code>mkdir /mnt/usb</code> | ||
Revision as of 16:52, 19 December 2016
- See JunOS knowledge base: https://kb.juniper.net/InfoCenter/index?page=content&id=KB11409
- Put the
jinstall-*.tgzfile on a FAT32 formatted USB drive and place it in the router's USB port - Connect to the router's console as
rootuser - Start a shell session:
start shell - Create a temporary folder and mount the USB drive:
mkdir /mnt/usbmount -t msdosfs /dev/da1s1 /mnt/usb
- Copy the
jinstallfile to the local file system:cp /mnt/usb/jinstall-ppc-14.2R7.5-domestic-signed.tgz /var/tmp/ - Unmount the USB drive and disconnect it:
umount /mnt/usb
