Difference between revisions of "Loading IOS on a WS-C2960X Switch Stack"
From NesevoWiki
Jump to navigationJump to search (Created page with "* Connect ("daisy-chain") all stack members with stacking cables as shown here: [http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2960-x-series-switches/whit...") |
|||
| Line 6: | Line 6: | ||
* Check connectivity: <code>ping 192.168.1.11</code> | * Check connectivity: <code>ping 192.168.1.11</code> | ||
* Install the nwew IOS firmware on all stack mambers simultaneously using this command: | * Install the nwew IOS firmware on all stack mambers simultaneously using this command: | ||
| − | ** <code>archive download-sw /force-reload /overwrite tftp://192.168.1.11/c2960x-universalk9- | + | ** <code>archive download-sw /force-reload /overwrite tftp://192.168.1.11/c2960x-universalk9-tar.150-2a.EX5.tar</code> |
| + | * '''Important:''' You must use the <code>.tar</code> version of the IOS image, the <code>.bin</code> version won't work with the <code>archive download-sw</code> command. | ||
Revision as of 09:14, 17 June 2015
- Connect ("daisy-chain") all stack members with stacking cables as shown here: WS-C2960X Stacking Guide
- Power on all stack members
- Connect one switch to your network (via the Mgmt interface)
- Connect to the serial console of the same switch
- Configure the Mgmt interface (FastEthernet 0)
- Check connectivity:
ping 192.168.1.11 - Install the nwew IOS firmware on all stack mambers simultaneously using this command:
archive download-sw /force-reload /overwrite tftp://192.168.1.11/c2960x-universalk9-tar.150-2a.EX5.tar
- Important: You must use the
.tarversion of the IOS image, the.binversion won't work with thearchive download-swcommand.
