Difference between revisions of "How to connect with the Nesevo lab"

From NesevoWiki
Jump to navigationJump to search
Line 3: Line 3:
 
'''Step 1:''' Download [http://www.putty.org// PuTTY]
 
'''Step 1:''' Download [http://www.putty.org// PuTTY]
 
<br/><br/>
 
<br/><br/>
−
'''Step 2:''' Type following IP- Address in: '''91.112.121.84'''
+
'''Step 2:''' choose the following IP- Address: '''91.112.121.84'''
 
<br/><br/>
 
<br/><br/>
−
'''Step 3:''' Choose '''Telnet''' as protocol and enter the special portnumber (which will be provided from us) in.
+
'''Step 3:''' Choose '''Telnet''' as protocol and enter the portnumber provided by your nesevo contact.
 
<br/><br/>
 
<br/><br/>
−
'''Step 4:''' Conect you with the Router.
+
'''Step 4:''' Conect with the Router.
 
<br/><br/>
 
<br/><br/>
−
'''Step 5:''' Enter the password to get access.
+
'''Step 5:''' Enter the password provided to get access.
 
<br/><br/>
 
<br/><br/>
  

Revision as of 08:02, 1 July 2011

Putty:

Step 1: Download PuTTY

Step 2: choose the following IP- Address: 91.112.121.84

Step 3: Choose Telnet as protocol and enter the portnumber provided by your nesevo contact.

Step 4: Conect with the Router.

Step 5: Enter the password provided to get access.

APC:

Step 1: Enter following IP- Address: 91.112.121.83

Step 2: To log in type following userdate in: 

  username: NesevoLab 
  password:

Step 3: To power up your device enter the "Device Manger" and choose the "Control" point.

Apc-zugang.jpg 

  * Choose point one to power up your device immedialy.
  * Choose point two to power up your device delayed.
  * Choose point three to turn off your device immedialy.
  * Choose point four to turn off your device delayed.
  * Choose point five to reboot your device immedialy.
  * Choose point six to reboot your device delayed.
  * Choose point seven to cancle pending commands.
Retrieved from "http://wiki.nesevo.com/index.php?title=How_to_connect_with_the_Nesevo_lab&oldid=2189"