Difference between revisions of "Cisco7606 and Cisco7606-S routers"
(New page: ==Supervisor engines== Both, the Cisco7606 and the Cisco7606-S router have six horizontal slots being numbered from top to bottom and measure 7 rack units (7 RU).<br/> While the supported ...) |
|||
| Line 45: | Line 45: | ||
'''Supported spower supplies in the Cisco7606 router'''<br/> | '''Supported spower supplies in the Cisco7606 router'''<br/> | ||
| − | * | + | *1900 watt AC-input power supply<br/> |
| − | **PWR- | + | **PWR-1900-AC/6<br/> |
| − | ''!!! Note: the power entry module '''PEM- | + | ''!!! Note: the power entry module '''PEM-20A-AC''' is needed when using a PWR-1900-AC/6. You need one '''PEM-20A-AC''' per PWR-1900-AC/6.<br/>'' |
''The power entry modules are installed on the front of the chassis on the very top.'' | ''The power entry modules are installed on the front of the chassis on the very top.'' | ||
| − | * | + | *1900 watt DC-input power supply<br/> |
| − | **PWR- | + | **PWR-1900-DC<br/> |
| − | ''!!! Note: the power entry module '''PEM-DC | + | ''!!! Note: the power entry module '''PEM-DC''' is needed when using a PWR-1900-DC. You need one '''PEM-DC''' per PWR-1900-DC.<br/>'' |
''The power entry modules are installed on the front of the chassis on the very top.'' | ''The power entry modules are installed on the front of the chassis on the very top.'' | ||
Revision as of 15:32, 9 May 2008
Supervisor engines
Both, the Cisco7606 and the Cisco7606-S router have six horizontal slots being numbered from top to bottom and measure 7 rack units (7 RU).
While the supported supervisor engine 2 (see below) is installed in slot 1 and an optional redundant supervisor engine 2 in slot 2, the supported supervisor engine 720 and supervisor engine 32 are installed in slot 5 (first supervisor engine)and slot 6 (optional redundant supervisor engine).
!!! Note: When installing a redundant supervisor engine, both supervisor engines must be identical.
!!! Note: The GBIC uplink ports are fully functional on the redundant supervisor engine in stand by.
If a redundant supervisor engine is not required, all free slots can be equipped with any supported cisco7600 series / catalyst 6500 series module.
Supported supervisor engines in the Cisco7606 router
- Supervisor engine 2
- WS-X6K-S2-PFC2
- WS-X6K-S2-MSFC2
- WS-X6K-S2U-MSFC2
- WS-X6K-S2-PFC2
- Supervisor engine 720
- WS-SUP720
- WS-SUP720-3B
- WS-SUP720-3BXL
- WS-SUP720
- Supervisor engine 32
- WS-SUP32-GE-3B
- WS-SUP32-10GE-3B
- WS-SUP32-GE-3B
!!! Note: While being supported in the Cisco7604 and the Cisco7606-S chassis, the route switch processor 720 is not supported in the ciso7606 router
Supported supervisor engines in the Cisco7606-S router
- Supervisor engine 32
- WS-SUP32-GE-3B
- WS-SUP32-10GE-3B
- WS-SUP32-GE-3B
- Supervisor engine 720
- WS-SUP720
- WS-SUP720-3B
- WS-SUP720-3BXL
- WS-SUP720
- Route switch processor 720
- RSP720-3C-GE
- RSP720-3CXL-GE
- RSP720-3C-GE
!!! Note: the supervisor engine 2 is not longer supported in the Cisco7606-S router.
Power supplies and power entry modules
Both, the Cisco7606 and the Cisco7606-S router have two power supply slots on the back of the chassis, with the power supply 1 being installed on the bottom and the optional redundant power supply 2 being installed in the upper of the two slots.
Supported spower supplies in the Cisco7606 router
- 1900 watt AC-input power supply
- PWR-1900-AC/6
- PWR-1900-AC/6
!!! Note: the power entry module PEM-20A-AC is needed when using a PWR-1900-AC/6. You need one PEM-20A-AC per PWR-1900-AC/6.
The power entry modules are installed on the front of the chassis on the very top.
- 1900 watt DC-input power supply
- PWR-1900-DC
- PWR-1900-DC
!!! Note: the power entry module PEM-DC is needed when using a PWR-1900-DC. You need one PEM-DC per PWR-1900-DC.
The power entry modules are installed on the front of the chassis on the very top.
- 1400 watt AC-input power supply
- PWR-1400-AC
- PWR-1400-AC
!!! Note: the power entry module PEM-20A-AC+ is needed when using a PWR-1400-AC. You need one PEM-20A-AC+ per PWR-1400-AC.
The power entry modules are installed on the front of the chassis on the very top.
Supported spower supplies in the Cisco7603-S router
- 1500 watt DC-input power supply
- PWR-1500-DC
- PWR-1500-DC
!!! Note: the power entry module PEM-1500W-DC/03S is needed when using a PWR-1500-DC. You need one PEM-1500W-DC/03S per PWR-1500-DC.
The power entry modules are installed on the front of the chassis on the very top.
There is no longer an AC power supply option for the Cisco7603-S router
Fan trays
Supported fan trays in the Cisco7603 router
- standard fan module
- FAN-MOD-3
- FAN-MOD-3
- high speed fan module
- FAN-MOD-3HS
- FAN-MOD-3HS
!!! Note: supervisor engine 720 configurations require the FAN-MOD-3HS. The FAN-MOD-3 will only work in supervisor engine 2 configurations.
Supported fan trays in the Cisco7603-S router
- high speed fan module
- FAN-MOD-3SHS
- FAN-MOD-3SHS
!!! Note: As a result of the sup 32 being the minimum required supervisor engine for the Cisco7603-S, no standard fan tray is supported in any cisco7603-S configuration. Both high speed fans, the FAN-MOD-3SHS and the FAN-MOD-3HS will work in the Cisco7603-S. With the FAN-MOD-3SHS being white, the colour would be the only difference.
