Difference between revisions of "Password Recovery for Cisco ASA 5500 Series"

From NesevoWiki
Jump to navigationJump to search
Line 14: Line 14:
  
 
Configuration Summary:
 
Configuration Summary:
 +
 +
Step 5 Record your current configuration register value, so you can restore it later.
 +
 +
Step 6 At the prompt, enter Y to change the value.

Revision as of 10:36, 11 May 2010

Step 1 Connect to the security appliance console port according to the "Accessing the Command-Line Interface".

Step 2 Power off the security appliance, and then power it on.

Step 3 During the startup messages, press the Escape key when prompted to enter ROMMON.

Step 4 To set the security appliance to ignore the startup configuration at reload, enter the following command:

rommon #1> confreg

The security appliance displays the current configuration register value, and asks if you want to change the value:

Current Configuration Register: 0x00000011

Configuration Summary:

Step 5 Record your current configuration register value, so you can restore it later.

Step 6 At the prompt, enter Y to change the value.