Difference between revisions of "Catalyst 5000 - Switching Fabric Only Supervisors"
From NesevoWiki
Jump to navigationJump to search (New page: Catalyst 5000 - Switching Fabric Only Supervisors <br/><br/> {| border = "1" |- ||Feature ||Supervisor I ||Supervisor II || Supervisor IIG |- ||Chassis Support || 5000, 5002 ||All || Al...) |
|||
| Line 120: | Line 120: | ||
|} | |} | ||
<br/><br/> | <br/><br/> | ||
| − | '''Note: | + | '''Note:''' Older versions of the Supervisor III came with NFFC's or NFFC-II's, instead of the newer NFFC-A and |
NFFC-IIA's. Some even older ones even came without a NFFC at all, and these models were quickly EOS'd. | NFFC-IIA's. Some even older ones even came without a NFFC at all, and these models were quickly EOS'd. | ||
Gigabit Etherchannel is not supported on any Supervisor, and never will. GEC is only supported on the 9-port | Gigabit Etherchannel is not supported on any Supervisor, and never will. GEC is only supported on the 9-port | ||
GE line card (WS-X5410). | GE line card (WS-X5410). | ||
Revision as of 14:18, 24 September 2008
Catalyst 5000 - Switching Fabric Only Supervisors
| Feature | Supervisor I | Supervisor II | Supervisor IIG |
| Chassis Support | 5000, 5002 | All | All |
| Redundant Supervisors | No | Yes | Yes |
| Processor | 25MHz Motorola MC68EC040 | 25MHz Motorola MC68EC040 | 37.5MHz Motorola MCF5102 |
| Modular NFFC-II | No | No | Integrated |
| Modular RSFC | No | No | Yes |
| Fixed Uplinks | (2)100BaseTX (2)100BaseTX | (2)100BaseFX (2)100BaseFX | None |
| Modular Uplinks | None | None | (4)100BaseTX (4)100BaseFX (2)1000BaseSX (2)1000BaseLX |
| Backplane Connection | 1.2 Gbps | 1.2 Gbps | 1.2 Gbps |
| PCMCIA Flash | No | No | No |
| Default Flash | 4 MB | 8 MB | 8 MB |
| Default DRAM | 20 MB | 32 MB | 32 MB |
| NVRAM | 256 KB | 256 KB | 512 KB |
| Console Port | DB-25 | DB-25 | RJ-45 |
| Auxiliary Port | No | No | RJ-45 |
| FE Management Interface | Yes | Yes | Yes |
| EtherChannel on Uplinks | No | FEC | FEC |
| Max # of MAC Addresses | 16000 | 16000 | 16000 |
| Max VLANs | 1024 | 1024 | 1024 |
| Dimensions (H/W/D) | 1.2 x 14.4 x 16 in. (3 x 35.6 x 40.6 cm) | 1.2 x 14.4 x 16 in. (3 x 35.6 x 40.6 cm) | 1.2 x 14.4 x 16 in. (3 x 35.6 x 40.6 cm) |
| Operating Temperature Range | 32 to 104° F (0 to 40° C) | 32 to 104° F (0 to 40° C) | 32 to 104° F (0 to 40° C) |
| Storage Temperature Range | -40 to 167° F (-40 to 75° C) | -40 to 167° F (-40 to 75° C) | -40 to 167° F (-40 to 75° C) |
| Relative Humidity | 10% to 90%, noncondensing | 10% to 90%, noncondensing | 10% to 90%, noncondensing |
Note: Older versions of the Supervisor III came with NFFC's or NFFC-II's, instead of the newer NFFC-A and
NFFC-IIA's. Some even older ones even came without a NFFC at all, and these models were quickly EOS'd.
Gigabit Etherchannel is not supported on any Supervisor, and never will. GEC is only supported on the 9-port
GE line card (WS-X5410).
