Difference between revisions of "Catalyst 4x00 Layer 2 Supervisors"
From NesevoWiki
Jump to navigationJump to search (New page: '''Catalyst 4x00 Layer 2 Supervisors''' <br/><br/> {| border = "1" |- ||FEATURES ||SUP 1 WS-X4012= ||SUP 2 WS-X4013= |- ||Chassis Support ||4003 ||4006/ 4503 |- ||End of Sale ||Yes (July ...) |
|||
| Line 39: | Line 39: | ||
|| CatOS Only | || CatOS Only | ||
|- | |- | ||
| − | ||Software Required 4.4 5.4 | + | ||Software Required |
| − | + | || 4.4 | |
| − | + | || 5.4 | |
|- | |- | ||
||Fixed Uplinks | ||Fixed Uplinks | ||
Revision as of 14:12, 24 September 2008
Catalyst 4x00 Layer 2 Supervisors
| FEATURES | SUP 1 WS-X4012= | SUP 2 WS-X4013= |
| Chassis Support | 4003 | 4006/ 4503 |
| End of Sale | Yes (July 26, 2004) | Yes (May 3, 2005) |
| Redundant Sup's | No | No |
| CPU | 150MHz R5000 | 150MHz R5000 |
| L2 ASIC Used | K1 | K1 |
| Layer 3 Optional, | using 4232-L3, 4604 Optional | using 4232-L3, 4604 |
| Layer 3 Protocols | IP. IPX, AT | IP. IPX, AT |
| Software Support | CatOS Only | CatOS Only |
| Software Required | 4.4 | 5.4 |
| Fixed Uplinks | None | 2 GBIC |
| Trunking | 802.1q | 802.1q |
| Backplane | 12 Gbps | 3 x 10Gbps |
| Forwarding Capacity | 18Mpps (L2), 6Mpps(L3/IP, using 4232-L3, 4604) | 18Mpps (L2), 6Mpps(L3/IP, using 4232-L3, 4604) |
| PFC-Like TCAM | No | No |
| External Flash Slot | No | No |
| Flash Card Capacity | N/A | N/A |
| Onboard Flash | 12MB | 16MB |
| Buffering | 8MB | 24MB |
| DRAM | 64MB | 64MB |
| DRAM Slots | 1 | 1 |
| NVRAM | 512KB | 512KB |
| Queues Per Port | 2 | 2 |
| Ingress Policers | 0 | 0 |
| Egress Policers | 0 | 0 |
| Management Ports | 1 DB-25 Console, 1 10 Mbps Ethernet | 2 DB-25 Console, 1 10 Mbps Ethernet |
| Max # of MAC's | 16000 | 16000 |
| Operating Temp | 32 to 104 Deg. F (0 to 40 Deg. C) | 32 to 104 Deg. F (0 to 40 Deg. C) |
| Storage Temp | -40 to 167 Deg. F (-40 to 75 Deg. C) | -40 to 167 Deg. F (-40 to 75 Deg. C) |
| Relative Humidity | 10% to 90%, noncondensing | 10% to 90%, noncondensing |
