Difference between revisions of "Cisco 6503 and Cisco 6503-E"

From NesevoWiki
Jump to navigationJump to search
Line 3: Line 3:
 
<br/>
 
<br/>
  
−
'''Supported supervisor engines in the Cisco6503 router'''
+
'''Supported supervisor engines in the Cisco6503 switch'''
 
<br/>
 
<br/>
 
*Supports Supervisor Engine 2
 
*Supports Supervisor Engine 2
Line 11: Line 11:
 
'''''Note:''''' Redundant supervisor engines must be configured identically.
 
'''''Note:''''' Redundant supervisor engines must be configured identically.
 
<br/><br/>
 
<br/><br/>
−
'''Supported supervisor engines in the Cisco6503-E router'''
+
'''Supported supervisor engines in the Cisco6503-E switch'''
 
<br/>
 
<br/>
 
*Supports Supervisor Engine 2
 
*Supports Supervisor Engine 2
Line 36: Line 36:
  
 
==Power supplies and power entry modules==
 
==Power supplies and power entry modules==
−
Both, the Cisco 6503 and the Cisco 6503-E router have two power supply slots on the back of the chassis, with the power supply 1 being installed on the bottom and the optional redundant power supply 2 being installed in the upper of the two slots.<br/>
+
Both, the Cisco 6503 and the Cisco 6503-E switch have two power supply slots on the back of the chassis, with the power supply 1 being installed on the bottom and the optional redundant power supply 2 being installed in the upper of the two slots.<br/>
  
−
'''Supported spower supplies in the Cisco 6503 router'''<br/>
+
'''Supported spower supplies in the Cisco 6503 switch'''<br/>
 
* 950 W AC-input power supply
 
* 950 W AC-input power supply
 
**PWR-950-AC  
 
**PWR-950-AC  
Line 51: Line 51:
 
''!!! Note: the power entry module '''PEM-20A-AC+''' is needed when using a PWR-1400-AC. You need one '''PEM-20A-AC+''' per PWR-1400-AC.<br/>''
 
''!!! Note: the power entry module '''PEM-20A-AC+''' is needed when using a PWR-1400-AC. You need one '''PEM-20A-AC+''' per PWR-1400-AC.<br/>''
 
<br/><br/>
 
<br/><br/>
−
'''Supported spower supplies in the Cisco 6503-E router'''<br/>
+
'''Supported spower supplies in the Cisco 6503-E switch'''<br/>
 
* 950 W AC-input power supply
 
* 950 W AC-input power supply
 
**PWR-950-AC  
 
**PWR-950-AC  

Revision as of 10:48, 20 August 2008

Supervisor engines

Both, the Cisco6503 and the Cisco6503-E switch have three horizontal slots being numbered from 1 (top) to 3 (bottom)

Supported supervisor engines in the Cisco6503 switch

  • Supports Supervisor Engine 2
  • Supervisor Engine 32
  • Supervisor Engine 720.


Note: Redundant supervisor engines must be configured identically.

Supported supervisor engines in the Cisco6503-E switch

  • Supports Supervisor Engine 2
  • Supervisor Engine 32
  • Supervisor Engine 720.


Note: Redundant supervisor engines must be configured identically.

Fan trys

Supported Fan trays in the 6503 series

  • Standard Fan try
    • FAN-MOD-3
  • High-speed fan tray
    • FAN-MOD-3HS


Note Both fan tray models contain four individual fans. The individual fans are not field replaceable; you must replace the fan tray.

Supported Fan trays in the 6503-E series

  • WS-C6503-E-FAN—282 CFM


Note The fan tray contains four individual fans. The individual fans are not field replaceable; you must replace the fan tray.

Power supplies and power entry modules

Both, the Cisco 6503 and the Cisco 6503-E switch have two power supply slots on the back of the chassis, with the power supply 1 being installed on the bottom and the optional redundant power supply 2 being installed in the upper of the two slots.

Supported spower supplies in the Cisco 6503 switch

  • 950 W AC-input power supply
    • PWR-950-AC

!!! Note: the power entry module PEM-15A-AC is needed when using a PWR-950-AC. You need one PEM-15A-AC per PWR-950-AC.

  • 950 W DC-input power supply
    • PWR-950-DC

!!! Note: the power entry module PEM-DC/3 is needed when using a PWR-950-DC. You need one PEM-DC/3 per PWR-950-DC.

  • 1400 W AC-input power supply
    • PWR-1400-AC

!!! Note: the power entry module PEM-20A-AC+ is needed when using a PWR-1400-AC. You need one PEM-20A-AC+ per PWR-1400-AC.

Supported spower supplies in the Cisco 6503-E switch

  • 950 W AC-input power supply
    • PWR-950-AC

!!! Note: the power entry module PEM-15A-AC is needed when using a PWR-950-AC. You need one PEM-15A-AC per PWR-950-AC.

  • 950 W DC-input power supply
    • PWR-950-DC

!!! Note: the power entry module PEM-DC/3 is needed when using a PWR-950-DC. You need one PEM-DC/3 per PWR-950-DC.

  • 1400 W AC-input power supply
    • PWR-1400-AC

!!! Note: the power entry module PEM-20A-AC+ is needed when using a PWR-1400-AC. You need one PEM-20A-AC+ per PWR-1400-AC.

Retrieved from "http://wiki.nesevo.com/index.php?title=Cisco_6503_and_Cisco_6503-E&oldid=433"