Difference between revisions of "Password recovery & checking / installing licenses"
From NesevoWiki
Jump to navigationJump to search| Line 23: | Line 23: | ||
* View licenses installed on the appliance; enter the show licenses command: | * View licenses installed on the appliance; enter the show licenses command: | ||
<code>amnesiac (config) # show licenses</code> | <code>amnesiac (config) # show licenses</code> | ||
| − | LIC-EXAMPLE-1050H-0000-0000-0-000X-0XX0 | + | LIC-EXAMPLE-1050H-0000-0000-0-000X-0XX0 |
| − | Index: 6 | + | Index: 6 |
| − | Feature: MSPECEX1050H | + | Feature: MSPECEX1050H |
| − | Valid: yes | + | Valid: yes |
| − | + | active: yes | |
<br> | <br> | ||
Revision as of 12:04, 21 December 2017
- Connect to the Riverbed CLI
- Enter enable mode; at the system prompt, enter the enable command:
amnesiac > enable - Enter configuration mode; at the system prompt, enter the configure terminal command:
amnesiac # configure terminal - View current and available model specifications; enter the show hardware spec command:
amnesiac (config) # show hardware spec
Spec Description
- ---------- ----------------------------------------------------------------------
1050_LR BW Limit: 8000 Kb/s Connection Limit: 800
(activation requires hardware)
1050_MR BW Limit: 10000 Kb/s Connection Limit: 1300
(activation requires hardware)
* 1050H BW Limit: 20000 Kb/s Connection Limit: 2300
(activation requires hardware)
1050_HR BW Limit: 20000 Kb/s Connection Limit: 2300
(activation requires hardware)
* = active
- Install the model upgrade license; enter the license install <license-key> command:
amnesiac (config) # license install LIC-EXAMPLE-1050H-0000-0000-0-000X-0XX0
- Write the model upgrade license to memory; enter the write memory command:
amnesiac (config) # write memory
- View licenses installed on the appliance; enter the show licenses command:
amnesiac (config) # show licenses
LIC-EXAMPLE-1050H-0000-0000-0-000X-0XX0 Index: 6 Feature: MSPECEX1050H Valid: yes active: yes
