Difference between revisions of "Loading IOS on a Nexus 7000/5000"
From NesevoWiki
Jump to navigationJump to searchLine 3: | Line 3: | ||
* power on the Nexus | * power on the Nexus | ||
− | * ''Abort Power On Auto Provisioning and continue with normal setup?'' → type '''''y''''' | + | * ''Abort Power On Auto Provisioning and continue with normal setup?'' → type '''''y''''' and '''''wait''''' for the next question to come up. |
* ''Do you want to enforce secure password standard?'' → type '''''n''''' | * ''Do you want to enforce secure password standard?'' → type '''''n''''' | ||
* Enter password for admin user (admin/admin) | * Enter password for admin user (admin/admin) |
Revision as of 14:13, 8 April 2014
- connect to serial console port
- connect mgmt 0 port with your network
- power on the Nexus
- Abort Power On Auto Provisioning and continue with normal setup? → type y and wait for the next question to come up.
- Do you want to enforce secure password standard? → type n
- Enter password for admin user (admin/admin)
- Would you like to enter the basic configuration dialog? → type n
- IP config
conf t
interface mgmt 0
ip address 192.168.0.240 255.255.255.0
no shutdown
exit
exit
- Test network connectivity:
ping 192.168.0.81 vrf management
- Copy IOS Files
cd bootflash:
dir
(check there is enough free space on bootflash)copy scp://user@hostip/path/to/file/iosfile.bin bootflash:iosfile.bin vrf management
copy scp://user@hostip/path/to/file/kickstartfile.bin bootflash:kickstartfile.bin vrf management
- install IOS
cd bootflash:
install all kickstart bootflash:///kickstartfile.bin system bootflash:///iosfile.bin
- When asked if Installation shall continue, confirm by entering
yes
- In case the Nexus doesn't reboot by itself:
boot kickstart bootflash:///<Image-Name>
boot system bootflash:///<Image-Name>
copy running-config startup-config
reload
- optional: save old IOS and kickstart image and the delete the from bootflash