Difference between revisions of "Cisco7603 and Cisco7603-S routers"
From NesevoWiki
Jump to navigationJump to searchLine 13: | Line 13: | ||
*Supervisor engine 720<br/> | *Supervisor engine 720<br/> | ||
− | |||
**WS-SUP720<br/> | **WS-SUP720<br/> | ||
**WS-SUP720-3B<br/> | **WS-SUP720-3B<br/> | ||
Line 23: | Line 22: | ||
*Supervisor engine 32<br/> | *Supervisor engine 32<br/> | ||
− | |||
**WS-SUP32-GE-3B<br/> | **WS-SUP32-GE-3B<br/> | ||
**WS-SUP32-10GE-3B<br/> | **WS-SUP32-10GE-3B<br/> | ||
*Supervisor engine 720<br/> | *Supervisor engine 720<br/> | ||
− | |||
**WS-SUP720<br/> | **WS-SUP720<br/> | ||
**WS-SUP720-3B<br/> | **WS-SUP720-3B<br/> | ||
Line 34: | Line 31: | ||
*Route switch processor 720<br/> | *Route switch processor 720<br/> | ||
− | |||
**RSP720-3C-GE<br/> | **RSP720-3C-GE<br/> | ||
**RSP720-3CXL-GE<br/> | **RSP720-3CXL-GE<br/> |
Revision as of 18:13, 29 April 2008
Supervisor engines
Both, the Cisco7603 and the Cisco7603-S router have three horizontal slots being numbered from top to bottom.
While slot 1 is reserved for the supervisor engine, slot 2 can contain an optional redundant supervisor engine.
When installing a redundant supervisor engine, both supervisor engines must be identical.
The GBIC uplink ports are fully functional on the redundant supervisor engine in stand by
Supported supervisor engines in the Cisco7603 router
- Supervisor engine 2
- WS-X6K-S2-PFC2
- WS-X6K-S2-MSFC2
- WS-X6K-S2U-MSFC2
- WS-X6K-S2-PFC2
- Supervisor engine 720
- WS-SUP720
- WS-SUP720-3B
- WS-SUP720-3BXL
- WS-SUP720
While being supported in the WS-C6503 and WS-C6503-E chassis, the supervisor engine 32 is not supported in the ciso7603 router
Supported supervisor engines in the Cisco7603-S router
- Supervisor engine 32
- WS-SUP32-GE-3B
- WS-SUP32-10GE-3B
- WS-SUP32-GE-3B
- Supervisor engine 720
- WS-SUP720
- WS-SUP720-3B
- WS-SUP720-3BXL
- WS-SUP720
- Route switch processor 720
- RSP720-3C-GE
- RSP720-3CXL-GE
- RSP720-3C-GE
the supervisor engine 2 is not longer supported in the Cisco7603-S router.