Difference between revisions of "Loading JunOS on an EX series switch"
From NesevoWiki
Jump to navigationJump to search (Created page with "The proccedure of loading JunOS on an EX series switch is exactly the same as Loading JunOS on an MX series router, with one exception: * As <code>/mnt</code> is a read-on...") |
|||
| Line 1: | Line 1: | ||
The proccedure of loading JunOS on an EX series switch is exactly the same as [[Loading JunOS on an MX series router]], with one exception: | The proccedure of loading JunOS on an EX series switch is exactly the same as [[Loading JunOS on an MX series router]], with one exception: | ||
* As <code>/mnt</code> is a read-only file-system on EX switches, you have to mount the USB thumb drive under <code>/tmp/usb</code> instead | * As <code>/mnt</code> is a read-only file-system on EX switches, you have to mount the USB thumb drive under <code>/tmp/usb</code> instead | ||
| + | |||
| + | If you get annoying messages about failing auto-image upgrade, do the following to disable them. | ||
| + | * Go to configure mode: <code>root> configure</code> | ||
| + | * Set a root password (otherwise you cannot commit changes): <code>root# set system root-authentication plain-text-password</code> (Use <code>Cisco123</admin> as password) | ||
| + | * Disable auto-upgrade: <code>root# delete chassis auto-image-upgrade</code> | ||
| + | * Commit changes and exit: <code>root# commit and-quit</code> | ||
Revision as of 11:51, 16 November 2017
The proccedure of loading JunOS on an EX series switch is exactly the same as Loading JunOS on an MX series router, with one exception:
- As
/mntis a read-only file-system on EX switches, you have to mount the USB thumb drive under/tmp/usbinstead
If you get annoying messages about failing auto-image upgrade, do the following to disable them.
- Go to configure mode:
root> configure - Set a root password (otherwise you cannot commit changes):
root# set system root-authentication plain-text-password(UseCisco123</admin> as password) - Disable auto-upgrade:
root# delete chassis auto-image-upgrade - Commit changes and exit:
root# commit and-quit
