Difference between revisions of "Loading JunOS on an MX series router"

Revision as of 09:49, 22 December 2016

Step-by-step:

Put the jinstall-*.tgz file on a FAT32 formatted USB drive and place it in the router's USB port
Connect to the router's console as root user (the prompt looks like this: root> )
Start a shell session: start shell (the prompt changes to root@% )
Create a temporary folder and mount the USB drive:
- mkdir /mnt/usb
- mount -t msdosfs /dev/da1s1 /mnt/usb
Copy the jinstall file to the local file system:
- Example: cp /mnt/usb/jinstall-ppc-14.2R7.5-domestic-signed.tgz /var/tmp/
- Example: cp /mnt/usb/jinstall-ppc-15.1R5.5-domestic-signed.tgz /var/tmp/
Unmount the USB drive and unplug it: umount /mnt/usb
Exit the shell session to go back to command mode: exit (the prompt changes back to root> )
Install the software with the command request system software add:
- Example: request system software add /var/tmp/jinstall-ppc-14.2R7.5-domestic-signed.tgz
- Example: request system software add /var/tmp/jinstall-ppc-15.1R5.5-domestic-signed.tgz
Reboot the router: request system reboot

@@ Line 3: / Line 3: @@
 * Put the <code>jinstall-*.tgz</code> file on a FAT32 formatted USB drive and place it in the router's USB port
 * Connect to the router's console as ''root'' user (the prompt looks like this: <code>root> </code>)
-* Start a shell session: <code>start shell</code> (the prompt changes to <code>root% </code>)
+* Start a shell session: <code>start shell</code> (the prompt changes to <code>root@% </code>)
 * Create a temporary folder and mount the USB drive:
 ** <code>mkdir /mnt/usb</code>