Difference between revisions of "Loading IOS on a WS-C3850 Switch"
From NesevoWiki
Jump to navigationJump to search (Created page with "* Configure the Mgmt network interface (that's ''GigabitEthernet 0/0'') * Test connectivity: ** <code>ping vrf Mgmt-intf 192.168.1.11</code> or ** <code>ping vrf Mgmt-vrf 19...") |
|||
| Line 1: | Line 1: | ||
| + | * Connect to the serial console | ||
| + | * Connect the Mgmt interface to your network | ||
* Configure the Mgmt network interface (that's ''GigabitEthernet 0/0'') | * Configure the Mgmt network interface (that's ''GigabitEthernet 0/0'') | ||
* Test connectivity: | * Test connectivity: | ||
Revision as of 15:55, 16 June 2015
- Connect to the serial console
- Connect the Mgmt interface to your network
- Configure the Mgmt network interface (that's GigabitEthernet 0/0)
- Test connectivity:
ping vrf Mgmt-intf 192.168.1.11orping vrf Mgmt-vrf 192.168.1.11
- Copy the
.binfile toflash:via TFTPcopy tftp: flash:
- Install the
.binfile using this command:software install file flash:cat3k_caa-universalk9.SPA.03.07.01.E.152-3.E1.bin- Answer yes when asked if you want to relaod the switch
- Answer no when asked if you want to save the configuration
