Difference between revisions of "Loading IOS on a Nexus 7000/5000"
From NesevoWiki
Jump to navigationJump to search(4 intermediate revisions by the same user not shown) | |||
Line 5: | Line 5: | ||
* ''Abort Power On Auto Provisioning and continue with normal setup?'' → type '''''y''''' (and '''wait''' for the next question to come up) | * ''Abort Power On Auto Provisioning and continue with normal setup?'' → type '''''y''''' (and '''wait''' for the next question to come up) | ||
* ''Do you want to enforce secure password standard?'' → type '''''n''''' | * ''Do you want to enforce secure password standard?'' → type '''''n''''' | ||
+ | * ''Would you like to enter the basic configuration dialog?'' → type '''''n''''' | ||
* Enter password for admin user (admin/admin) | * Enter password for admin user (admin/admin) | ||
− | |||
* IP config | * IP config | ||
Line 26: | Line 26: | ||
*** <code>copy scp: bootflash:</code> | *** <code>copy scp: bootflash:</code> | ||
*** <code>Enter file name: /path/to/file/iosfile.bin</code> | *** <code>Enter file name: /path/to/file/iosfile.bin</code> | ||
+ | *** When asked for <code>vrf</code>, enter <code>management</code> | ||
*** <code>Enter host name: 192.168.1.11</code> | *** <code>Enter host name: 192.168.1.11</code> | ||
*** <code>Enter user name: lab</code> | *** <code>Enter user name: lab</code> | ||
Line 32: | Line 33: | ||
*** repeat above procedure for kickstart file | *** repeat above procedure for kickstart file | ||
− | * | + | * Install IOS |
** <code>cd bootflash:</code> | ** <code>cd bootflash:</code> | ||
+ | ** <code>dir</code> | ||
** <code>install all kickstart bootflash:///kickstartfile.bin system bootflash:///iosfile.bin</code> | ** <code>install all kickstart bootflash:///kickstartfile.bin system bootflash:///iosfile.bin</code> | ||
** When asked if Installation shall continue, confirm by entering <code>yes</code> | ** When asked if Installation shall continue, confirm by entering <code>yes</code> | ||
− | ** In case the Nexus doesn't reboot by itself: | + | ** In case the Nexus doesn't reboot by itself: <code>reload</code> |
− | + | ** Type <code>show version</code> to verify the running image version | |
− | ** | + | ** optional: save old IOS and kickstart image and then delete the files from bootflash |
− | |||
− | |||
− | ** optional: save old IOS and kickstart image and |
Latest revision as of 15:19, 8 April 2014
- connect to serial console port
- connect mgmt 0 port with your network
- power on the Nexus
- Abort Power On Auto Provisioning and continue with normal setup? → type y (and wait for the next question to come up)
- Do you want to enforce secure password standard? → type n
- Would you like to enter the basic configuration dialog? → type n
- Enter password for admin user (admin/admin)
- IP config
conf t
interface mgmt 0
ip address 192.168.1.240 255.255.255.0
no shutdown
exit
exit
- Test network connectivity:
ping 192.168.1.11 vrf management
- Copy IOS Files
cd bootflash:
dir
(check there is enough free space on bootflash)- Either: Copy files with one-line command
copy scp://user@hostip/path/to/file/iosfile.bin bootflash:iosfile.bin vrf management
copy scp://user@hostip/path/to/file/kickstartfile.bin bootflash:kickstartfile.bin vrf management
- Or: Copy files in interactive mode
copy scp: bootflash:
Enter file name: /path/to/file/iosfile.bin
- When asked for
vrf
, entermanagement
Enter host name: 192.168.1.11
Enter user name: lab
- When asked to confirm host's authenticity (ssh fingerprint), do so by typing yes
Enter Password: <your password>
- repeat above procedure for kickstart file
- Install IOS
cd bootflash:
dir
install all kickstart bootflash:///kickstartfile.bin system bootflash:///iosfile.bin
- When asked if Installation shall continue, confirm by entering
yes
- In case the Nexus doesn't reboot by itself:
reload
- Type
show version
to verify the running image version - optional: save old IOS and kickstart image and then delete the files from bootflash