Difference between revisions of "Loading IOS on a Nexus 7000/5000"
From NesevoWiki
Jump to navigationJump to search| Line 26: | Line 26: | ||
*** <code>copy scp: bootflash:</code> | *** <code>copy scp: bootflash:</code> | ||
*** <code>Enter file name: /path/to/file/iosfile.bin</code> | *** <code>Enter file name: /path/to/file/iosfile.bin</code> | ||
| + | *** When asked for <code>vrf</code>, enter <code>management</code> | ||
*** <code>Enter host name: 192.168.1.11</code> | *** <code>Enter host name: 192.168.1.11</code> | ||
| − | |||
*** <code>Enter user name: lab</code> | *** <code>Enter user name: lab</code> | ||
*** When asked to confirm host's authenticity (ssh fingerprint), do so by typing '''''yes''''' | *** When asked to confirm host's authenticity (ssh fingerprint), do so by typing '''''yes''''' | ||
Revision as of 15:18, 8 April 2014
- connect to serial console port
- connect mgmt 0 port with your network
- power on the Nexus
- Abort Power On Auto Provisioning and continue with normal setup? → type y (and wait for the next question to come up)
- Do you want to enforce secure password standard? → type n
- Would you like to enter the basic configuration dialog? → type n
- Enter password for admin user (admin/admin)
- IP config
conf tinterface mgmt 0ip address 192.168.1.240 255.255.255.0no shutdownexitexit- Test network connectivity:
ping 192.168.1.11 vrf management
- Copy IOS Files
cd bootflash:dir(check there is enough free space on bootflash)- Either: Copy files with one-line command
copy scp://user@hostip/path/to/file/iosfile.bin bootflash:iosfile.bin vrf managementcopy scp://user@hostip/path/to/file/kickstartfile.bin bootflash:kickstartfile.bin vrf management
- Or: Copy files in interactive mode
copy scp: bootflash:Enter file name: /path/to/file/iosfile.bin- When asked for
vrf, entermanagement Enter host name: 192.168.1.11Enter user name: lab- When asked to confirm host's authenticity (ssh fingerprint), do so by typing yes
Enter Password: <your password>- repeat above procedure for kickstart file
- install IOS
cd bootflash:install all kickstart bootflash:///kickstartfile.bin system bootflash:///iosfile.bin- When asked if Installation shall continue, confirm by entering
yes - In case the Nexus doesn't reboot by itself:
reload - Type
show versionto verify the running image version - optional: save old IOS and kickstart image and then delete the files from bootflash