Cisco7613 router

Supervisor engines

The Cisco7613 router has thirteen horizontal slots being numbered from top to bottom and measures 19 rack units (19 RU).
While the supported supervisor engine 2 (see below) is installed in slot 1 and an optional redundant supervisor engine 2 in slot 2, the supported supervisor engine 720, supervisor engine 32 and route switch processor 720 are installed in slot 5 (first supervisor engine)and slot 6 (optional redundant supervisor engine).
!!! Note: When installing a redundant supervisor engine, both supervisor engines must be identical.
!!! Note: The GBIC uplink ports are fully functional on the redundant supervisor engine in stand by.
If a redundant supervisor engine is not required, all free slots can be equipped with any supported cisco7600 series / catalyst 6500 series module.

Supported supervisor engines in the Cisco7613 router

• Supervisor engine 2
  !!! To be installed in slot 1 (first supervisor engine) and in slot 2 (optional redundant supervisor engine).
  
  • WS-X6K-S2-PFC2
    
  • WS-X6K-S2-MSFC2
    
  • WS-X6K-S2U-MSFC2
    

• Supervisor engine 720
  !!! To be installed in slot 7 (first supervisor engine) and in slot 8 (optional redundant supervisor engine).
  
  • WS-SUP720
    
  • WS-SUP720-3B
    
  • WS-SUP720-3BXL
    

!!!Note: The Supervisor Enigne 720 has two GBIC uplink ports and one 10/100/1000 Tx port. Only two of the three ports can be active at any one time.

• Supervisor engine 32
  !!! To be installed in slot 7 (first supervisor engine) and in slot 8 (optional redundant supervisor engine).
  
  • WS-SUP32-GE-3B
    
  • WS-SUP32-10GE-3B
    

• Route switch processor 720
  !!! To be installed in slot 5 (first supervisor engine) and in slot 6 (optional redundant supervisor engine).
  
  • RSP720-3C-GE
    
  • RSP720-3CXL-GE
    

Power supplies and power entry modules

The Cisco7613 router has two power supply slots on the front of the chassis, with the power supply 1 being installed on the left and the optional redundant power supply 2 being installed in the right one of the two slots.

Supported spower supplies in the Cisco7613 router

• 2500 watt DC-input power supply
  
  • WS-CDC-2500W
    

No power entry module is needed when using a WS-CDC-2500W

• 3000 watt AC-input power supply
  
  • WS-CAC-3000W
    

No power entry module is needed when using a WS-CAC-3000W

• 4000 watt AC-input power supply
  
  • WS-CAC-4000W-US1
    

No power entry module is needed when using a WS-CAC-4000W-US1/6

• 4000 watt DC-input power supply
  
  • PWR-4000-DC
    

No power entry module is needed when using a PWR-4000-DC

• 6000 watt AC-input power supply
  
  • WS-CAC-6000W
    

No power entry module is needed when using a WS-CAC-6000W

• 6000 watt DC-input power supply
  
  • PWR-6000-DC
    

No power entry module is needed when using a PWR-6000-DC

Fan trays

Supported fan trays in the Cisco7613 router

• high speed fan module
  
  • FWS-C6K-13SLT-FAN2