Difference between revisions of "Cisco Catalyst 6503 and Cisco 6503-E"

From NesevoWiki
Jump to navigationJump to search
 
(2 intermediate revisions by one other user not shown)
Line 4: Line 4:
 
[[image:WS-C6503-E front.jpg|framed|WS-C6503-E front]]
 
[[image:WS-C6503-E front.jpg|framed|WS-C6503-E front]]
 
[[image:WS-C6503-E rear.jpg|framed|WS-C6503-E rear]]
 
[[image:WS-C6503-E rear.jpg|framed|WS-C6503-E rear]]
−
Both, the Cisco WS-C6503 and the Cisco WS-C6503-E switch have three horizontal slots being numbered from 1 (top) to 3 (bottom)
+
Both, the Cisco WS-C6503 and the Cisco WS-C6503-E switch have three horizontal slots being numbered from 1 (top) to 3 (bottom) and measure 4 rack units (4 RU).
 +
While slot 1 is reserved for the supervisor engine, slot 2 can contain an optional redundant supervisor engine.
 +
!!! Note: When installing a redundant supervisor engine, both supervisor engines must be identical.
 +
!!! Note: The GBIC uplink ports are fully functional on the redundant supervisor engine in stand by.
 +
If a redundant supervisor engine is not required, slot two can be equipped with any supported cisco7600 series / catalyst 6500 series module.
 
<br/>
 
<br/>
  
Line 95: Line 99:
 
''!!! Note: the power entry module '''PEM-20A-AC+''' is needed when using a PWR-1400-AC. You need one '''PEM-20A-AC+''' per PWR-1400-AC.<br/>''
 
''!!! Note: the power entry module '''PEM-20A-AC+''' is needed when using a PWR-1400-AC. You need one '''PEM-20A-AC+''' per PWR-1400-AC.<br/>''
 
<br/><br/>
 
<br/><br/>
−
 
−
* [[Cisco Catalyst 6504-E]]
 
−
* [[Cisco Catalyst 6506 and Cisco 6506-E]]
 
−
* [[Cisco Catalyst 6509 and Cisco 6509-E]]
 
−
* [[Cisco Catalyst 6509-NEB and Cisco 6509-NEB-A]]
 
−
* [[Cisco Catalyst 6509-V-E]]
 
−
* [[Cisco Catalyst 6513]]
 

Latest revision as of 08:21, 12 October 2009

Video Datasheet

Cisco Catalyst 6503-E Datasheet

Supervisor engines

WS-C6503-E front
WS-C6503-E rear

Both, the Cisco WS-C6503 and the Cisco WS-C6503-E switch have three horizontal slots being numbered from 1 (top) to 3 (bottom) and measure 4 rack units (4 RU). While slot 1 is reserved for the supervisor engine, slot 2 can contain an optional redundant supervisor engine. !!! Note: When installing a redundant supervisor engine, both supervisor engines must be identical. !!! Note: The GBIC uplink ports are fully functional on the redundant supervisor engine in stand by. If a redundant supervisor engine is not required, slot two can be equipped with any supported cisco7600 series / catalyst 6500 series module.

Supported supervisor engines in the Cisco WS-C6503 switch

  • Supervisor Engine 32
    • WS-SUP32-GE-3B
    • WS-SUP32-10GE-3B
    • WS-S32-GE-PISA
    • WS-S32P-10GE-PISA


Note: Redundant supervisor engines must be configured identically.

Supported supervisor engines in the Cisco WS-C6503-E switch

  • Supervisor Engine 32
    • WS-SUP32-GE-3B
    • WS-SUP32-10GE-3B
    • WS-S32-GE-PISA
    • WS-S32P-10GE-PISA


Note: Redundant supervisor engines must be configured identically.

Fan trays

Supported Fan trays in the WS-C6503 series

  • Standard Fan tray
    • FAN-MOD-3
  • High-speed fan tray
    • FAN-MOD-3HS


Note The standard fan tray will only support WS-X6K-S2-PFC2, WS-X6K-S2-MSFC2 and WS-X6K-S2U-MSFC2. Supervisor Engin 32 and 720 will need a high-speed fan tray

Supported Fan trays in the WS-C6503-E series

  • WS-C6503-E-FAN


Note: The WS-C6503-E-Fan ist a high-speed fan tray.


Power supplies and power entry modules

Both, the Cisco WS-C6503 and the Cisco WS-C6503-E switch have two power supply slots on the back of the chassis, with the power supply 1 being installed on the bottom and the optional redundant power supply 2 being installed in the upper of the two slots.

Supported spower supplies in the Cisco WS-C6503 switch

  • 950 W AC-input power supply
    • PWR-950-AC

!!! Note: the power entry module PEM-15A-AC is needed when using a PWR-950-AC. You need one PEM-15A-AC per PWR-950-AC.

  • 950 W DC-input power supply
    • PWR-950-DC

!!! Note: the power entry module PEM-DC/3 is needed when using a PWR-950-DC. You need one PEM-DC/3 per PWR-950-DC.

  • 1400 W AC-input power supply
    • PWR-1400-AC

!!! Note: the power entry module PEM-20A-AC+ is needed when using a PWR-1400-AC. You need one PEM-20A-AC+ per PWR-1400-AC.

Supported spower supplies in the Cisco WS-C6503-E switch

  • 950 W AC-input power supply
    • PWR-950-AC

!!! Note: the power entry module PEM-15A-AC is needed when using a PWR-950-AC. You need one PEM-15A-AC per PWR-950-AC.

  • 950 W DC-input power supply
    • PWR-950-DC

!!! Note: the power entry module PEM-DC/3 is needed when using a PWR-950-DC. You need one PEM-DC/3 per PWR-950-DC.

  • 1400 W AC-input power supply
    • PWR-1400-AC

!!! Note: the power entry module PEM-20A-AC+ is needed when using a PWR-1400-AC. You need one PEM-20A-AC+ per PWR-1400-AC.

Retrieved from "http://wiki.nesevo.com/index.php?title=Cisco_Catalyst_6503_and_Cisco_6503-E&oldid=1353"