Loading JunOS on an EX series switch - Revision history

Philipp at 09:52, 22 December 2020

2020-12-22T09:52:16Z

Philipp at 10:52, 16 November 2017

2017-11-16T10:52:19Z

Philipp at 10:51, 16 November 2017

2017-11-16T10:51:33Z

Philipp: Created page with "The proccedure of loading JunOS on an EX series switch is exactly the same as Loading JunOS on an MX series router, with one exception: * As `/mnt` is a read-on..."

2017-11-16T10:15:22Z

Created page with "The proccedure of loading JunOS on an EX series switch is exactly the same as Loading JunOS on an MX series router, with one exception: * As <code>/mnt</code> is a read-on..."

New page

The proccedure of loading JunOS on an EX series switch is exactly the same as [[Loading JunOS on an MX series router]], with one exception:
* As <code>/mnt</code> is a read-only file-system on EX switches, you have to mount the USB thumb drive under <code>/tmp/usb</code> instead

← Older revision		Revision as of 09:52, 22 December 2020
Line 1:		Line 1:
−	The ~~proccedure~~ of loading JunOS on an EX series switch is exactly the same as [[Loading JunOS on an MX series router]], with one exception:	+	The procedure of loading JunOS on an EX series (or ACX series) switch is exactly the same as [[Loading JunOS on an MX series router]], with one exception:
	* As <code>/mnt</code> is a read-only file-system on EX switches, you have to mount the USB thumb drive under <code>/tmp/usb</code> instead		* As <code>/mnt</code> is a read-only file-system on EX switches, you have to mount the USB thumb drive under <code>/tmp/usb</code> instead

@@ Line 4: / Line 4: @@
 If you get annoying messages about failing auto-image upgrade, do the following to disable them.
 * Go to configure mode: <code>root> configure</code>
-* Set a root password (otherwise you cannot commit changes): <code>root# set system root-authentication plain-text-password</code> (Use <code>Cisco123</admin> as password)
+* Set a root password (otherwise you cannot commit changes): <code>root# set system root-authentication plain-text-password</code> (Use <code>Cisco123</code> as password)
 * Disable auto-upgrade: <code>root# delete chassis auto-image-upgrade</code>
 * Commit changes and exit: <code>root# commit and-quit</code>

← Older revision		Revision as of 10:51, 16 November 2017
Line 1:		Line 1:
	The proccedure of loading JunOS on an EX series switch is exactly the same as [[Loading JunOS on an MX series router]], with one exception:		The proccedure of loading JunOS on an EX series switch is exactly the same as [[Loading JunOS on an MX series router]], with one exception:
	* As <code>/mnt</code> is a read-only file-system on EX switches, you have to mount the USB thumb drive under <code>/tmp/usb</code> instead		* As <code>/mnt</code> is a read-only file-system on EX switches, you have to mount the USB thumb drive under <code>/tmp/usb</code> instead
		+
		+	If you get annoying messages about failing auto-image upgrade, do the following to disable them.
		+	* Go to configure mode: <code>root> configure</code>
		+	* Set a root password (otherwise you cannot commit changes): <code>root# set system root-authentication plain-text-password</code> (Use <code>Cisco123</admin> as password)
		+	* Disable auto-upgrade: <code>root# delete chassis auto-image-upgrade</code>
		+	* Commit changes and exit: <code>root# commit and-quit</code>

Loading JunOS on an EX series switch - Revision history

Philipp at 09:52, 22 December 2020

Philipp at 10:52, 16 November 2017

Philipp at 10:51, 16 November 2017

Philipp: Created page with "The proccedure of loading JunOS on an EX series switch is exactly the same as Loading JunOS on an MX series router, with one exception: * As /mnt is a read-on..."

Philipp: Created page with "The proccedure of loading JunOS on an EX series switch is exactly the same as Loading JunOS on an MX series router, with one exception: * As `/mnt` is a read-on..."