Cisco7609 and Cisco7609-S routers - Revision history

Stephan: /* Supervisor engines */

2011-06-08T08:49:23Z

Supervisor engines

Stephan: /* Supervisor engines */

2011-06-08T08:46:52Z

Supervisor engines

Florian at 07:51, 6 July 2009

2009-07-06T07:51:00Z

Florian at 07:50, 6 July 2009

2009-07-06T07:50:41Z

Florian at 07:28, 25 August 2008

2008-08-25T07:28:05Z

Stephan: /* Fan trays */

2008-05-13T09:26:55Z

Fan trays

Stephan at 08:08, 13 May 2008

2008-05-13T08:08:34Z

Stephan at 08:05, 13 May 2008

2008-05-13T08:05:47Z

Stephan at 07:49, 13 May 2008

2008-05-13T07:49:34Z

Stephan: New page: ==Supervisor engines== Both, the Cisco7609 and the Cisco7609-S router have nine vertical slots being numbered from right to left and measure 21 rack units (21 RU).
While the supported...

2008-05-13T07:47:27Z

New page: ==Supervisor engines== Both, the Cisco7609 and the Cisco7609-S router have nine vertical slots being numbered from right to left and measure 21 rack units (21 RU). While the supported...

New page

==Supervisor engines==
Both, the Cisco7609 and the Cisco7609-S router have nine vertical slots being numbered from right to left and measure 21 rack units (21 RU). 
While the supported supervisor engine 2 (see below) is installed in slot 1 and an optional redundant supervisor engine 2 in slot 2, the supported supervisor engine 720, supervisor engine 32 and route switch processor 720 are installed in slot 5 (first supervisor engine)and slot 6 (optional redundant supervisor engine). 
''!!! Note: When installing a redundant supervisor engine, both supervisor engines must be identical.'' 
''!!! Note: The GBIC uplink ports are fully functional on the redundant supervisor engine in stand by.'' 
If a redundant supervisor engine is not required, all free slots can be equipped with any supported cisco7600 series / catalyst 6500 series module. 

'''Supported supervisor engines in the Cisco7609 router''' 

*Supervisor engine 2 ''!!! To be installed in slot 1 (first supervisor engine) and in slot 2 (optional redundant supervisor engine).'' 
**WS-X6K-S2-PFC2 
**WS-X6K-S2-MSFC2 
**WS-X6K-S2U-MSFC2 

*Supervisor engine 720 ''!!! To be installed in slot 5 (first supervisor engine) and in slot 6 (optional redundant supervisor engine).'' 
**WS-SUP720 
**WS-SUP720-3B 
**WS-SUP720-3BXL 

''!!!Note: The Supervisor Enigne 720 has two GBIC uplink ports and one 10/100/1000 Tx port. Only two of the three ports can be active at any one time.'' 

*Supervisor engine 32 ''!!! To be installed in slot 5 (first supervisor engine) and in slot 6 (optional redundant supervisor engine).'' 
**WS-SUP32-GE-3B 
**WS-SUP32-10GE-3B 

''!!! Note: While being supported in the Cisco7604 and the Cisco7606-S chassis, the route switch processor 720 is not supported in the ciso7606 router''

'''Supported supervisor engines in the Cisco7606-S router''' 

*Supervisor engine 32 ''!!! To be installed in slot 5 (first supervisor engine) and in slot 6 (optional redundant supervisor engine).'' 
**WS-SUP32-GE-3B 
**WS-SUP32-10GE-3B 

*Supervisor engine 720 ''!!! To be installed in slot 5 (first supervisor engine) and in slot 6 (optional redundant supervisor engine).'' 
**WS-SUP720 
**WS-SUP720-3B 
**WS-SUP720-3BXL 

*Route switch processor 720 ''!!! To be installed in slot 5 (first supervisor engine) and in slot 6 (optional redundant supervisor engine).'' 
**RSP720-3C-GE 
**RSP720-3CXL-GE 

''!!! Note: the supervisor engine 2 is not longer supported in the Cisco7606-S router.'' 

==Power supplies and power entry modules==
Both, the Cisco7606 and the Cisco7606-S router have two power supply slots on the back of the chassis, with the power supply 1 being installed on the bottom and the optional redundant power supply 2 being installed in the upper of the two slots. 

'''Supported power supplies in the Cisco7606 router''' 
*1900 watt AC-input power supply 
**PWR-1900-AC/6 
''!!! Note: the power entry module '''PEM-20A-AC''' is needed when using a PWR-1900-AC/6. You need one '''PEM-20A-AC''' per PWR-1900-AC/6. ''
''The power entry modules are installed on the front of the chassis on the very top.''

*1900 watt DC-input power supply 
**PWR-1900-DC 
''!!! Note: the power entry module '''PEM-DC''' is needed when using a PWR-1900-DC. You need one '''PEM-DC''' per PWR-1900-DC. ''
''The power entry modules are installed on the front of the chassis on the very top.''

*2700 watt AC-input power supply 
**PWR-2700-AC 
''No power entry module is needed when using a PWR-2700-AC''

*2700 watt DC-input power supply 
**PWR-2700-DC 
''No power entry module is needed when using a PWR-2700-DC''

'''Supported power supplies in the Cisco7606-S router''' 
*2700 watt AC-input power supply 
**PWR-2700-AC 
''No power entry module is needed when using a PWR-2700-AC''

*2700 watt DC-input power supply 
**PWR-2700-DC 
''No power entry module is needed when using a PWR-2700-DC''

==Fan trays==

'''Supported fan trays in the Cisco7606 router''' 
*standard fan module 
**WS-C6K-6SLOT-FAN 
*high speed fan module 
**FAN-MOD-6HS 
''!!! Note: supervisor engine 720 configurations require the '''FAN-MOD-6HS'''. '''WS-C6K-6SLOT-FAN''' will only work in supervisor engine 2 configurations.'' 

'''Supported fan trays in the Cisco7606-S router''' 
*high speed fan module 
**FAN-MOD-6SHS 
''!!! Note: As a result of the sup 32 being the minimum required supervisor engine for the Cisco7606-S, no standard fan tray is supported in any cisco7606-S configuration. Both high speed fans, the FAN-MOD-6SHS and the FAN-MOD-6HS will work in the Cisco7606-S. With the FAN-MOD-6SHS being white, the colour would be the only difference.''

@@ Line 1: / Line 1: @@
 ==Supervisor engines==
-Both, the Cisco7609 and the Cisco7609-S router has nine vertical slots being numbered from right to left and measure 21 rack units (21 RU).<br/>
+Both, the Cisco7609 and the Cisco7609-S router has nine vertical slots being numbered from right to left and measures 21 rack units (21 RU).<br/>
 While the supported supervisor engine 2 (see below) is installed in slot 1 and an optional redundant supervisor engine 2 in slot 2, the supported supervisor engine 720, supervisor engine 32 and route switch processor 720 are installed in slot 5 (first supervisor engine)and slot 6 (optional redundant supervisor engine).<br/><br/>
 '''''!!! Note: When installing a redundant supervisor engine, both supervisor engines must be identical.'''''<br/>

@@ Line 1: / Line 1: @@
 ==Supervisor engines==
-Both, the Cisco7609 and the Cisco7609-S router have nine vertical slots being numbered from right to left and measure 21 rack units (21 RU).<br/>
+Both, the Cisco7609 and the Cisco7609-S router has nine vertical slots being numbered from right to left and measure 21 rack units (21 RU).<br/>
 While the supported supervisor engine 2 (see below) is installed in slot 1 and an optional redundant supervisor engine 2 in slot 2, the supported supervisor engine 720, supervisor engine 32 and route switch processor 720 are installed in slot 5 (first supervisor engine)and slot 6 (optional redundant supervisor engine).<br/><br/>
 '''''!!! Note: When installing a redundant supervisor engine, both supervisor engines must be identical.'''''<br/>

← Older revision		Revision as of 07:51, 6 July 2009
Line 8:		Line 8:


−	'''Supported supervisor engines in the Cisco7609 router'''<br/>~~<br/>~~	+	'''Supported supervisor engines in the Cisco7609 router'''<br/>
−

	*Supervisor engine 2<br/>''!!! To be installed in slot 1 (first supervisor engine) and in slot 2 (optional redundant supervisor engine).''<br/>		*Supervisor engine 2<br/>''!!! To be installed in slot 1 (first supervisor engine) and in slot 2 (optional redundant supervisor engine).''<br/>

@@ Line 1: / Line 1: @@
 ==Supervisor engines==
 Both, the Cisco7609 and the Cisco7609-S router have nine vertical slots being numbered from right to left and measure 21 rack units (21 RU).<br/>
-While the supported supervisor engine 2 (see below) is installed in slot 1 and an optional redundant supervisor engine 2 in slot 2, the supported supervisor engine 720, supervisor engine 32 and route switch processor 720 are installed in slot 5 (first supervisor engine)and slot 6 (optional redundant supervisor engine).<br/>
+While the supported supervisor engine 2 (see below) is installed in slot 1 and an optional redundant supervisor engine 2 in slot 2, the supported supervisor engine 720, supervisor engine 32 and route switch processor 720 are installed in slot 5 (first supervisor engine)and slot 6 (optional redundant supervisor engine).<br/><br/>
-''!!! Note: When installing a redundant supervisor engine, both supervisor engines must be identical.''<br/>
+'''''!!! Note: When installing a redundant supervisor engine, both supervisor engines must be identical.'''''<br/>
-''!!! Note: The GBIC uplink ports are fully functional on the redundant supervisor engine in stand by.''<br/>
+'''''!!! Note: The GBIC uplink ports are fully functional on the redundant supervisor engine in stand by.'''''<br/><br/>
 If a redundant supervisor engine is not required, all free slots can be equipped with any supported cisco7600 series / catalyst 6500 series module.<br/>
 *Supervisor engine 2<br/>''!!! To be installed in slot 1 (first supervisor engine) and in slot 2 (optional redundant supervisor engine).''<br/>

@@ Line 9: / Line 9: @@
 *Supervisor engine 2<br/>''!!! To be installed in slot 1 (first supervisor engine) and in slot 2 (optional redundant supervisor engine).''<br/>
-**WS-X6K-S2-PFC2<br/>
+** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-X6K-S2-PFC2]]<br/>
-**WS-X6K-S2-MSFC2<br/>
+** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-X6K-S2-MSFC2]]<br/>
-**WS-X6K-S2U-MSFC2<br/>
+** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-X6K-S2U-MSFC2]] <br/>
 *Supervisor engine 720<br/>''!!! To be installed in slot 5 (first supervisor engine) and in slot 6 (optional redundant supervisor engine).''<br/>
-**WS-SUP720<br/>
+** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-SUP720]] <br/>
-**WS-SUP720-3B<br/>
+** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-SUP720-3B]] <br/>
-**WS-SUP720-3BXL<br/>
+** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-SUP720-3BXL]] <br/>
 ''!!!Note: The Supervisor Enigne 720 has two GBIC uplink ports and one 10/100/1000 Tx port. Only two of the three ports can be active at any one time.''<br/>
 *Supervisor engine 32<br/>''!!! To be installed in slot 5 (first supervisor engine) and in slot 6 (optional redundant supervisor engine).''<br/>
-**WS-SUP32-GE-3B<br/>
+** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-SUP32-GE-3B]] <br/>
-**WS-SUP32-10GE-3B<br/>
+** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-SUP32-10GE-3B]] <br/>
 *Route switch processor 720<br/>''!!! To be installed in slot 5 (first supervisor engine) and in slot 6 (optional redundant supervisor engine).''<br/>
@@ Line 31: / Line 31: @@
 *Supervisor engine 32<br/>''!!! To be installed in slot 5 (first supervisor engine) and in slot 6 (optional redundant supervisor engine).''<br/>
-**WS-SUP32-GE-3B<br/>
+** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-SUP32-GE-3B]] <br/>
-**WS-SUP32-10GE-3B<br/>
+** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-SUP32-10GE-3B]] <br/>
 *Supervisor engine 720<br/>''!!! To be installed in slot 5 (first supervisor engine) and in slot 6 (optional redundant supervisor engine).''<br/>
-**WS-SUP720<br/>
+** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-SUP720]]<br/>
-**WS-SUP720-3B<br/>
+** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-SUP720-3B]]<br/>
-**WS-SUP720-3BXL<br/>
+** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-SUP720-3BXL]]<br/>
 *Route switch processor 720<br/>''!!! To be installed in slot 5 (first supervisor engine) and in slot 6 (optional redundant supervisor engine).''<br/>

@@ Line 93: / Line 93: @@
 ==Fan trays==
-'''Supported fan trays in the Cisco7606 router'''<br/>
+Both, the Cisco7609 and the Cisco7609-S router require two fan modules, that are both installed on the front of the chassis above the module slots.<br/>
-*standard fan module<br/>
-**WS-C6K-6SLOT-FAN<br/>
+'''Supported fan trays in the Cisco7609 router'''<br/>
 *high speed fan module<br/>
-**FAN-MOD-6HS<br/>
+**FAN-MOD-09<br/>
-'''Supported fan trays in the Cisco7606-S router'''<br/>
+'''Supported fan trays in the Cisco7609-S router'''<br/>
 *high speed fan module<br/>
-**FAN-MOD-6SHS<br/>
+**FAN-MOD-9SHS<br/>
-''!!! Note: As a result of the sup 32 being the minimum required supervisor engine for the Cisco7606-S, no standard fan tray is supported in any cisco7606-S configuration. Both high speed fans, the FAN-MOD-6SHS and the FAN-MOD-6HS will work in the Cisco7606-S. With the FAN-MOD-6SHS being white, the colour would be the only difference.''
+''!!! Note: Both high speed fans, the FAN-MOD-09 and the FAN-MOD-9SHS will work in the Cisco7609-S chassis. With the FAN-MOD-9SHS being white, the colour would be the only difference.''

@@ Line 46: / Line 46: @@
 ==Power supplies and power entry modules==
-Both, the Cisco7606 and the Cisco7606-S router have two power supply slots on the back of the chassis, with the power supply 1 being installed on the bottom and the optional redundant power supply 2 being installed in the upper of the two slots.<br/>
+Both, the Cisco7609 and the Cisco7609-S router have two power supply slots on the front of the chassis, with the power supply 1 being installed on the left and the optional redundant power supply 2 being installed in the right one of the two slots.<br/>
 '''Supported power supplies in the Cisco7609 router'''<br/>

@@ Line 28: / Line 28: @@
 **RSP720-3CXL-GE<br/>
-'''Supported supervisor engines in the Cisco7606-S router'''<br/>
+'''Supported supervisor engines in the Cisco7609-S router'''<br/>
 *Supervisor engine 32<br/>''!!! To be installed in slot 5 (first supervisor engine) and in slot 6 (optional redundant supervisor engine).''<br/>
@@ Line 43: / Line 43: @@
 **RSP720-3CXL-GE<br/>
-''!!! Note: the supervisor engine 2 is not longer supported in the Cisco7606-S router.''<br/>
+''!!! Note: the supervisor engine 2 is not longer supported in the Cisco7609-S router.''<br/>
 ==Power supplies and power entry modules==
 Both, the Cisco7606 and the Cisco7606-S router have two power supply slots on the back of the chassis, with the power supply 1 being installed on the bottom and the optional redundant power supply 2 being installed in the upper of the two slots.<br/>
-'''Supported power supplies in the Cisco7606 router'''<br/>
+'''Supported power supplies in the Cisco7609 router'''<br/>
-*1900 watt DC-input power supply<br/>
+*2500 watt DC-input power supply<br/>
-**PWR-1900-DC<br/>
+**WS-CDC-2500W<br/>
-''!!! Note: the power entry module '''PEM-DC''' is needed when using a PWR-1900-DC. You need one '''PEM-DC''' per PWR-1900-DC.<br/>''
+''No power entry module is needed when using a WS-CDC-2500W''<br/>
-*2700 watt AC-input power supply<br/>
+*3000 watt AC-input power supply<br/>
-**PWR-2700-AC<br/>
+**WS-CAC-3000W<br/>
-''No power entry module is needed when using a PWR-2700-AC''
+''No power entry module is needed when using a WS-CAC-3000W''
-*2700 watt DC-input power supply<br/>
+*4000 watt AC-input power supply<br/>
-**PWR-2700-DC<br/>
+**WS-CAC-4000W-US1<br/>
-''No power entry module is needed when using a PWR-2700-DC''
+''No power entry module is needed when using a WS-CAC-4000W-US1/6''<br/>
-'''Supported power supplies in the Cisco7606-S router'''<br/>
+*4000 watt DC-input power supply<br/>
-*2700 watt AC-input power supply<br/>
+**PWR-4000-DC<br/>
-**PWR-2700-AC<br/>
+''No power entry module is needed when using a PWR-4000-DC''<br/>
-*2700 watt DC-input power supply<br/>
+*6000 watt AC-input power supply<br/>
-**PWR-2700-DC<br/>
+**WS-CAC-6000W<br/>
-''No power entry module is needed when using a PWR-2700-DC''
+''No power entry module is needed when using a WS-CAC-6000W''<br/>
 ==Fan trays==

Cisco7609 and Cisco7609-S routers - Revision history

Stephan: /* Supervisor engines */

Stephan: /* Supervisor engines */

Florian at 07:51, 6 July 2009

Florian at 07:50, 6 July 2009

Florian at 07:28, 25 August 2008

Stephan: /* Fan trays */

Stephan at 08:08, 13 May 2008

Stephan at 08:05, 13 May 2008

Stephan at 07:49, 13 May 2008

Stephan: New page: ==Supervisor engines== Both, the Cisco7609 and the Cisco7609-S router have nine vertical slots being numbered from right to left and measure 21 rack units (21 RU). While the supported...

Stephan: New page: ==Supervisor engines== Both, the Cisco7609 and the Cisco7609-S router have nine vertical slots being numbered from right to left and measure 21 rack units (21 RU).
While the supported...