Cisco7604 router - Revision history

Florian at 08:42, 2 July 2009

2009-07-02T08:42:49Z

Florian at 07:20, 25 August 2008

2008-08-25T07:20:37Z

Stephan at 13:51, 9 May 2008

2008-05-09T13:51:41Z

Stephan at 13:31, 9 May 2008

2008-05-09T13:31:37Z

Stephan: New page: ==Supervisor engines== The Cisco7604 router has four horizontal slots being numbered from top to bottom and measures 5 rack units (5 RU).
While slot 1 is reserved for the supervisor e...

2008-05-09T13:15:48Z

New page: ==Supervisor engines== The Cisco7604 router has four horizontal slots being numbered from top to bottom and measures 5 rack units (5 RU). While slot 1 is reserved for the supervisor e...

New page

==Supervisor engines==
The Cisco7604 router has four horizontal slots being numbered from top to bottom and measures 5 rack units (5 RU). 
While slot 1 is reserved for the supervisor engine, slot 2 can contain an optional redundant supervisor engine. 
''!!! Note: When installing a redundant supervisor engine, both supervisor engines must be identical.'' 
''!!! Note: The GBIC uplink ports are fully functional on the redundant supervisor engine in stand by.'' 
If a redundant supervisor engine is not required, slot two can be equipped with any supported cisco7600 series / catalyst 6500 series module. 
'''Supported supervisor engines in the Cisco7603 router''' 

*Supervisor engine 2 
**WS-X6K-S2-PFC2 
**WS-X6K-S2-MSFC2 
**WS-X6K-S2U-MSFC2 

*Supervisor engine 720 
**WS-SUP720 
**WS-SUP720-3B 
**WS-SUP720-3BXL 

''!!! Note: While being supported in the WS-C6503 and WS-C6503-E chassis, the supervisor engine 32 is not supported in the ciso7603 router''

'''Supported supervisor engines in the Cisco7603-S router''' 

*Supervisor engine 32 
**WS-SUP32-GE-3B 
**WS-SUP32-10GE-3B 

*Supervisor engine 720 
**WS-SUP720 
**WS-SUP720-3B 
**WS-SUP720-3BXL 

*Route switch processor 720 
**RSP720-3C-GE 
**RSP720-3CXL-GE 

''!!! Note: the supervisor engine 2 is not longer supported in the Cisco7603-S router.'' 

==Power supplies and power entry modules==
Both, the Cisco7603 and the Cisco7603-S router have two power supply slots on the back of the chassis, with the power supply 1 being installed on the bottom and the optional redundant power supply 2 being installed in the upper of the two slots. 

'''Supported spower supplies in the Cisco7603 router''' 
*950 watt AC-input power supply 
**PWR-950-AC 
''!!! Note: the power entry module '''PEM-15A-AC ''' is needed when using a PWR-950-AC. You need one '''PEM-15A-AC ''' per PWR-950-AC. ''
''The power entry modules are installed on the front of the chassis on the very top.''

*950 watt DC-input power supply 
**PWR-950-DC 
''!!! Note: the power entry module '''PEM-DC/3''' is needed when using a PWR-950-DC. You need one '''PEM-DC/3''' per PWR-950-DC. ''
''The power entry modules are installed on the front of the chassis on the very top.''

*1400 watt AC-input power supply 
**PWR-1400-AC 
''!!! Note: the power entry module '''PEM-20A-AC+''' is needed when using a PWR-1400-AC. You need one '''PEM-20A-AC+''' per PWR-1400-AC. ''
''The power entry modules are installed on the front of the chassis on the very top.''

'''Supported spower supplies in the Cisco7603-S router''' 
*1500 watt DC-input power supply 
**PWR-1500-DC 
''!!! Note: the power entry module '''PEM-1500W-DC/03S''' is needed when using a PWR-1500-DC. You need one '''PEM-1500W-DC/03S''' per PWR-1500-DC. ''
''The power entry modules are installed on the front of the chassis on the very top.'' 
'''''There is no longer an AC power supply option for the Cisco7603-S router'''''

==Fan trays==

'''Supported fan trays in the Cisco7603 router''' 
*standard fan module 
**FAN-MOD-3 
*high speed fan module 
**FAN-MOD-3HS 
''!!! Note: supervisor engine 720 configurations require the '''FAN-MOD-3HS'''. '''The FAN-MOD-3''' will only work in supervisor engine 2 configurations.'' 

'''Supported fan trays in the Cisco7603-S router''' 
*high speed fan module 
**FAN-MOD-3SHS 
''!!! Note: As a result of the sup 32 being the minimum required supervisor engine for the Cisco7603-S, no standard fan tray is supported in any cisco7603-S configuration. Both high speed fans, the FAN-MOD-3SHS and the FAN-MOD-3HS will work in the Cisco7603-S. With the FAN-MOD-3SHS being white, the colour would be the only difference.''

@@ Line 1: / Line 1: @@
 ==Supervisor engines==
 The Cisco7604 router has four horizontal slots being numbered from top to bottom and measures 5 rack units (5 RU).<br/>
 While slot 1 is reserved for the supervisor engine, slot 2 can contain an optional redundant supervisor engine.<br/>

@@ Line 9: / Line 9: @@
 *Supervisor engine 720<br/>
-**WS-SUP720<br/>
+** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-SUP720]]<br/>
-**WS-SUP720-3B<br/>
+** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-SUP720-3B]]<br/>
-**WS-SUP720-3BXL<br/>
+** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-SUP720-3BXL]]<br/>
 *Route switch processor 720<br/>
@@ Line 18: / Line 18: @@
 *Supervisor engine 32<br/>
-**WS-SUP32-GE-3B<br/>
+** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-SUP32-GE-3B]]<br/>
-**WS-SUP32-10GE-3B<br/>
+** [[Cisco catalyst 6000 / 6500 series supervisor engines | WS-SUP32-10GE-3B]]<br/>
 ''!!! Note: While being supported in the Cisco7603 router, the supervisor engine 2 is not supported in the ciso7604 router''

@@ Line 24: / Line 24: @@
 ==Power supplies and power entry modules==
-Both, the Cisco7603 and the Cisco7603-S router have two power supply slots on the back of the chassis, with the power supply 1 being installed on the bottom and the optional redundant power supply 2 being installed in the upper of the two slots.<br/>
+No power entry modules are needed with the cisco7604 router. It has two power supply slots on the back of the chassis, with the power supply 1 being installed on the bottom and the optional redundant power supply 2 being installed in the upper of the two slots.<br/>
-'''Supported spower supplies in the Cisco7603 router'''<br/>
+'''Supported spower supplies in the Cisco7604 router'''<br/>
-*950 watt AC-input power supply<br/>
+*2700 watt AC-input power supply<br/>
-**PWR-950-AC<br/>
+**PWR-2700-AC/4<br/>
-*950 watt DC-input power supply<br/>
+*2700 watt DC-input power supply<br/>
-**PWR-950-DC<br/>
+**PWR-2700-DC/4<br/>
 ==Fan trays==
-'''Supported fan trays in the Cisco7603 router'''<br/>
+'''Supported fan trays in the Cisco7604 router'''<br/>
 *high speed fan module<br/>
-**FAN-MOD-3SHS<br/>
+**FAN-MOD-4HS<br/>
-''!!! Note: As a result of the sup 32 being the minimum required supervisor engine for the Cisco7603-S, no standard fan tray is supported in any cisco7603-S configuration. Both high speed fans, the FAN-MOD-3SHS and the FAN-MOD-3HS will work in the Cisco7603-S. With the FAN-MOD-3SHS being white, the colour would be the only difference.''
+''!!! Note: As a result of the sup 32 being the minimum required supervisor engine for the Cisco7604, no standard fan tray is supported in any cisco7604 configuration.''