Florian: New page: {| border = "1" ||'''Connection Type''' ||'''Connector Type, Cable Color''' ||'''Cable''' ||'''Use with''' |- ||'''Alarm Interface Connections''' |align="center"| || |align="center"| |-...

2009-05-29T08:33:23Z

New page: {| border = "1" ||'''Connection Type''' ||'''Connector Type, Cable Color''' ||'''Cable''' ||'''Use with''' |- ||'''Alarm Interface Connections''' |align="center"| || |align="center"| |-...

New page

{| border = "1"
||'''Connection Type'''
||'''Connector Type, Cable Color'''
||'''Cable'''
||'''Use with'''
|-
||'''Alarm Interface Connections'''
|align="center"|
||
|align="center"|
|-
||To alarm interface patch panels or main distribution frame
|align="center"|50-pin D
||Micro DB-50 SCSI transition
|align="center"|NM-AIC-64
|-
||'''Analog Dialup'''
|align="center"|
||
|align="center"|
|-
||300 bps to 33.6 kbps analog dialup
|align="center"|RJ-11
||RJ-11 straight-through
|align="center"|NM-8AM NM-8AM-V2 NM-16AM NM-16AM-V2
|-
||'''ATM'''
|align="center"|
||
|align="center"|
|-
||ATM to ADSL
|align="center"|RJ-45, light green
||RJ-45 UTP category 3, 4, 5 or higher RJ-45 STP category 1, 1A, 9, or 9A
|align="center"|NM-1ATM-25
|-
||T3 ATM
|align="center"|BNC
||BNC coaxial T3
|align="center"|NM-1A-T3 NM-1A-T3/E3
|-
||E3 ATM
|align="center"|BNC
||BNC coaxial E3
|align="center"|NM-1A-E3 NM-1A-T3/E3
|-
||ATM, optical
|align="center"|Duplex or simplex SC
||62.5-micron core with an optical loss of
|align="center"|NM-1A-OC3-POM NM-1A-OC3MM NM-1A-OC3SMI NM-1A-OC3SML NM-1A-OC3MM-EP NM-1A-OC3SMI-EP NM-1A-OC3SML-EP NM-1A-OC3MM-1V NM-1A-OC3SMI-1V NM-1A-OC3SML-1V
|-
||
|align="center"|
||0 to 9 dB Note: Maximum path length of 2 km (1.24 miles), all cables, end to end!
|align="center"|
|-
||
|align="center"|
||50-micron core with optical loss of 7 dB Note: Maximum path length of2 km (1.24 miles), all cables, end to end!
|align="center"|
|-
||
|align="center"|
||9-micron core Note: Maximum path length of 45 km (27.9 miles) for single-mode long (SML) reach and 15 km (9.3 miles) for single-mode intermediate (SMI) reach.
|align="center"|
|-
||'''Circuit Emulation over IP (CEoIP)'''
|align="center"|
||
|align="center"|
|-
||T1/E1 CEoIP
|align="center"|RJ-48C
||RJ-48 T1/E1 straight-through
|align="center"|NM-CEM-4TE1 Note: To connect to a 75-ohm unbalanced E1 network, use CAB-ADP-75-120!
|-
||Serial CEoIP
|align="center"|60-pin D, blue
||Cisco Smart serial 12-in-1
|align="center"|NM-CEM-4SER
|-
||
|align="center"|
||Cisco Smart serial extended 12-in-1
|align="center"|
|-
||'''Ethernet'''
|align="center"|
||
|align="center"|
|-
||Ethernet
|align="center"|RJ-45, yellow
||10BASE-T Category 5 or above UTP
|align="center"|NM-1E
|-
||
|align="center"|DB-15
||Attachment unit interface (AUI) cable
|align="center"|NM-4E NM-1E2W NM-2E2W NM-1E1R2W
|-
|align="center"|Fast Ethernet, copper
|align="center"|RJ-45
||100BASE-T Category 5 or above UTP
|align="center"|1FE1CE1U NM-1FE2CE1B NM-1FE2CE1U NM-16ESW NM-16ESW-1GIG NM-16ESW-PWR NM-16ESW-PWR-1GIG NM-CE-BP-20G-K9 NM-CE-BP-40G-K9 NM-CE-BP-80G-K9 NM-CE-BP-SCSI-K9 NMD-36ESW-PWR-2G NME-16ES-1G NME-16ES-1G-P NME-X-23ES-1G NM-CIDS-K9 NM-NAM
|-
|align="center"|
|align="center"|
||
|align="center"|NMD-36ESW NMD-36ESW-2GIG NMD-36ESW-PWR NME-X-23ES-1G-P NME-XD-24ES-1S-P NME-XD-48ES-2S-P NM-1FE-TX NM-1FE2W NM-1FE2W-V2 NM-2FE2W NM-2FE2W-V2 NM-1FE1R2W NM-1FE1R2W-V2 NM-1FE1CT1 NM-1FE2CT1 NM-1FE1CT1-CSU NM-1FE2CT1-CSU NM-1FE1CE1B NM-
|-
||Fast Ethernet, optical
|align="center"|SC
||100BASE-T MMF
|align="center"|NM-1FE-FX NM-1FE-FX-V2
|-
||
|align="center"|SC
||100BASE-T SMF
|align="center"|NM-1FE-SMF
|-
||Gigabit Ethernet, copper
|align="center"|RJ-45
||1000BASE-T Category 5 or above UTP
|align="center"|NM-16ESW NM-16ESW-1GIG NM-16ESW-PWR NM-16ESW-PWR-1GIG NM-1GE (through GBIC) NME-WAE-302-K9 NME-WAE-502-K9 NME-WAE-522-K9 NMD-36ESW NMD-36ESW-2GIG
|-
||
|align="center"|
||
|align="center"|NMD-36ESW-PWR NMD-36ESW-PWR-2G NME-16ES-1G NME-16ES-1G-P NME-AIR-WLC8-K9 NME-AIR-WLC12-K9 NME-AON-K9 NME-NAC-K9 NME-NAM-80S NME-X-23ES-1G NME-X-23ES-1G-P NME-XD-24ES-1S-P NME-XD-48ES-2S-P
|-
||Gigabit Ethernet, optical
|align="center"|SC, yellow
||10-micron SMF
|align="center"|NM-1GE (through GBIC)
|-
||
|align="center"|SC, orange
||62.5-micron MMF
|align="center"|NME-16ES-1G NME-16ES-1G-P NME-X-23ES-1G NME-X-23ES-1G-P NME-XD-24ES-1S-P NME-XD-48ES-2S-P
|-
||'''ISDN Connections'''
|align="center"|
||
|align="center"|
|-
||Channelized T1 PRI, without CSU
|align="center"|DB-15
||DB-15 straight-through T1
|align="center"|NM-1FE1CT1 NM-1FE2CT1 NM-1CT1 NM-2CT1
|-
||Channelized T1 PRI, with CSU
|align="center"|RJ-48C, tan
||RJ-48C to RJ-48C straight-through T1
|align="center"|NM-1FE1CT1-CSU NM-1FE2CT1-CSU NM-1CT1-CSU NM-2CT1-CSU
|-
||Channelized T1 PRI, with or without CSU
|align="center"|RJ-48S, tan
||RJ-48S to RJ-48S straight-through T1
|align="center"|NM-1CE1T1-PRI NM-2CE1T1-PRI
|-
||Channelized E1 PRI, balanced
|align="center"|DB-15, tan
||DB-15 to DB-15 120-ohm balanced E1
|align="center"|NM-1FE1CE1B
|-
||
|align="center"|DB-15 to twin-ax, tan
||DB-15 to twin-ax 75-ohm balanced E1
|align="center"|NM-1FE2CE1B NM-1CE1B
|-
||
|align="center"|DB-15 to RJ-45, tan
||DB-15 to RJ-45 120-ohm balanced E1
|align="center"|NM-2CE1B
|-
||
|align="center"|RJ-48S, tan
||RJ-48S to RJ-48S straight-through 120-ohm balanced E1
|align="center"|NM-1CE1T1-PRI NM-2CE1T1-PRI
|-
||
|align="center"|RJ-48S to DB-15, tan
||RJ-48S to DB-15 120-ohm balanced E1
|align="center"|
|-
||
|align="center"|RJ-48S to twin-ax
||RJ-48S to twin-ax 120-ohm balanced E1
|align="center"|
|-
||Channelized E1 PRI, unbalanced
|align="center"|DB-15 to BNC, tan
||DB-15 to BNC 75-ohm unbalanced E1
|align="center"|NM-1FE1CE1U NM-1FE2CE1U NM-1CE1U NM-2CE-1U
|-
||
|align="center"|RJ-48S to BNC, tan
||RJ-48S to BNC 75-ohm unbalanced E1
|align="center"|NM-1CE1T1-PRI NM-2CE1T1-PRI
|-
||BRI S/T (external NT1)
|align="center"|RJ-45, orange
||RJ-45 straight-through
|align="center"|NM-4B-S/T NM-8B-S/T
|-
||BRI U (built-in NT1)
|align="center"|RJ-45, red
||RJ-45 straight-through
|align="center"|NM-4B-U NM-8B-U
|-
||'''Serial Connections'''
|align="center"|
||
|align="center"|
|-
||Synchronous serial
|align="center"|60-pin D, blue
||Serial transition cable (EIA/TIA-232, EIA/TIA-449, EIA/TIA-530 DTE, V.35, X.21, NRZ/NRZI)
|align="center"|NM-4T NM-4A/S NM-8A/S
|-
||Asynchronous serial
|align="center"|68-pin D to 25-pin D
||DB-68 to DB-25 EIA/TIA-232 octal
|align="center"|NM-16A NM-32A
|-
||
|align="center"|68-pin D to RJ-45
||DB-68 to RJ-45 EIA/TIA-232 octal
|align="center"|
|-
||Serial
|align="center"|60-pin D, blue
||Cisco Smart serial 12-in-1
|align="center"|NM-16A/S
|-
||Serial surge protection
|align="center"|
||Cisco Product ID CAB-SS-SURGE
|align="center"|
|-
||Fractional DS3 or below, to DSU
|align="center"|50-pin D, blue
||DB-50 HSSI DTE
|align="center"|NM-1HSSI
|-
||Fractional DS3 or below, to another router
|align="center"|
||DB-50 HSSI null modem
|align="center"|
|-
||'''Service Module Connections'''
|align="center"|
||
||
|-
||To external storage array
|align="center"|68-pin D
||68-pin low-voltage differential (LVD) SCSI Note: 36-, 91- or 108-inch (274 cm) cables can be used, depending on the distance between the network module and the external storage array!
||NM-CE-BP-SCSI
|-
||'''Token Ring Connections'''
|align="center"|
||
||
|-
||Token Ring, shielded
|align="center"|DB-9
||Token Ring lobe cable, shielded STP
|align="center"|NM-1E1R2W NM-1FE1R2W NM-1FE1R2W-V2
|-
||Token Ring, unshielded
|align="center"|RJ-45
||Token Ring lobe cable, unshielded UTP
|align="center"|
|-
||'''WAN Connections'''
|align="center"|
||
||
|-
||T1/E1 WAN
|align="center"|RJ-48C/CA81A
||RJ-48 T1/E1 straight-through
||NM-4T1-IMA NM-8T1-IMA NM-4E1-IMA NM-8E1-IMA NM-HDV2-1T1/E1 NM-HDV2-2T1/E1
|-
||T3/DS3/E3 WAN
|align="center"|BNC connector
||BNC T3/E3 coaxial
||NM-1T3/E3 NM-1A-T3 NM-1A-E3 NM-1A-T3/E3
|-
||'''Wireless and Satellite Connections'''
|align="center"|
||
||
|-
||To antenna
|align="center"|BNC
||BNC indoor IF coaxial
||NM-WMDA
|-
||To satellite dish
|align="center"|F-connector
||75-ohm F-connector shielded RG-6
||NM-1VSAT-GILAT
|-
||'''Voice Connections'''
|align="center"|
||
||
|-
||Analog voice FXS/FXO
|align="center"|RJ-21
||253PP10GYADI male-to-male (Graybar)
|align="center"|NM-HDA-4FXS
|-
||
|align="center"|
||253PC10GYADI male-to-female (Graybar)
|align="center"|
|-
||
|align="center"|
||AT125-SM patch panel (Graybar)
|align="center"|
|-
||
|align="center"|
||RJ-21 cable
||EVM-HDA-8FXS/DID
|-
|}

Cabling for Cisco Network Modules - Revision history

Florian: New page: {| border = "1" ||'''Connection Type''' ||'''Connector Type, Cable Color''' ||'''Cable''' ||'''Use with''' |- ||'''Alarm Interface Connections''' |align="center"| || |align="center"| |-...