View source for Loading IOS on a WS-C2960X Switch Stack

* Connect ("daisy-chain") all stack members with stacking cables as shown here: [http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2960-x-series-switches/white_paper_c11-728327.html WS-C2960X Stacking Guide]
* Power on all stack members
* Connect one switch to your network (via the Mgmt interface)
* Connect to the serial console of the same switch
* Configure the Mgmt interface (''FastEthernet 0'')
* Check connectivity: <code>ping 192.168.1.11</code>
* Install the nwew IOS firmware on all stack mambers simultaneously using this command:
** <code>archive download-sw /force-reload /overwrite tftp://192.168.1.11/c2960x-universalk9-mz.150-2a.EX5.bin</code>