View source for Cabling and Configuring Opengear CM4148

== Connecting Cisco Network Equipment ==
=== Configuration of Serial Ports ===
* Common Settings 
** <code>Baud Rate:    9600</code>
** <code>Data Bits:    8</code>
** <code>Parity:       None</code>
** <code>Stop Bits:    1</code>
** <code>Flow Control: None</code>
* Console Server Settings 
** Activate Console Server Mode
** Activate SSH (or other protocols you want to use)

=== Cabling ===
* Plug Opengear's Cisco specific adapter Cable (Opengear PartNo 449016) into the Cisco device's console port (do '''not''' plug it into the console server's serial port, that won't work!)
* Use a common, straight ethernet patch cable to connect the console server's serial port to the socket of the adapter cable.
* Connect via SSH to <code><IP of console server></code> on port <code>3000 + <PortNo></code>. If your console server has the IP address of 192.168.3.3 and your Cisco device is connected to port 25, the connect to <code>192.168.3.3:3025</code>.

== Connecting Opengear Local Consoles ==


== Connecting ALIX Mini PC Local Consoles ===