View source for Cabling and Configuring Opengear CM4148

From NesevoWiki

← Cabling and Configuring Opengear CM4148

Jump to navigation Jump to search

You do not have permission to edit this page, for the following reason:

The action you have requested is limited to users in the group: Users.

You can view and copy the source of this page.

== Connecting Cisco Network Equipment ==
=== Configuration of Serial Ports ===
* <code>Baud Rate:    9600</code>
* <code>Data Bits:    8</code>
* <code>Parity:       None</code>
* <code>Stop Bits:    1</code>
* <code>Flow Control: None</code>


== Connecting Opengear Local Consoles ==


== Connecting ALIX Mini PC Local Consoles ===

Return to Cabling and Configuring Opengear CM4148.

Retrieved from "http://wiki.nesevo.com/index.php/Cabling_and_Configuring_Opengear_CM4148"

Navigation menu