View source for Cisco7609 and Cisco7609-S routers

==Supervisor engines==
Both, the Cisco7609 and the Cisco7609-S router have nine vertical slots being numbered from right to left and measure 21 rack units (21 RU).<br/>
While the supported supervisor engine 2 (see below) is installed in slot 1 and an optional redundant supervisor engine 2 in slot 2, the supported supervisor engine 720, supervisor engine 32 and route switch processor 720 are installed in slot 5 (first supervisor engine)and slot 6 (optional redundant supervisor engine).<br/>
''!!! Note: When installing a redundant supervisor engine, both supervisor engines must be identical.''<br/>
''!!! Note: The GBIC uplink ports are fully functional on the redundant supervisor engine in stand by.''<br/>
If a redundant supervisor engine is not required, all free slots can be equipped with any supported cisco7600 series / catalyst 6500 series module.<br/>

'''Supported supervisor engines in the Cisco7609 router'''<br/>

*Supervisor engine 2<br/>''!!! To be installed in slot 1 (first supervisor engine) and in slot 2 (optional redundant supervisor engine).''<br/>
**WS-X6K-S2-PFC2<br/>
**WS-X6K-S2-MSFC2<br/>
**WS-X6K-S2U-MSFC2<br/>

*Supervisor engine 720<br/>''!!! To be installed in slot 5 (first supervisor engine) and in slot 6 (optional redundant supervisor engine).''<br/>
**WS-SUP720<br/>
**WS-SUP720-3B<br/>
**WS-SUP720-3BXL<br/>

''!!!Note: The Supervisor Enigne 720 has two GBIC uplink ports and one 10/100/1000 Tx port. Only two of the three ports can be active at any one time.''<br/>

*Supervisor engine 32<br/>''!!! To be installed in slot 5 (first supervisor engine) and in slot 6 (optional redundant supervisor engine).''<br/>
**WS-SUP32-GE-3B<br/>
**WS-SUP32-10GE-3B<br/>

*Route switch processor 720<br/>''!!! To be installed in slot 5 (first supervisor engine) and in slot 6 (optional redundant supervisor engine).''<br/>
**RSP720-3C-GE<br/>
**RSP720-3CXL-GE<br/>

'''Supported supervisor engines in the Cisco7609-S router'''<br/>

*Supervisor engine 32<br/>''!!! To be installed in slot 5 (first supervisor engine) and in slot 6 (optional redundant supervisor engine).''<br/>
**WS-SUP32-GE-3B<br/>
**WS-SUP32-10GE-3B<br/>

*Supervisor engine 720<br/>''!!! To be installed in slot 5 (first supervisor engine) and in slot 6 (optional redundant supervisor engine).''<br/>
**WS-SUP720<br/>
**WS-SUP720-3B<br/>
**WS-SUP720-3BXL<br/>

*Route switch processor 720<br/>''!!! To be installed in slot 5 (first supervisor engine) and in slot 6 (optional redundant supervisor engine).''<br/>
**RSP720-3C-GE<br/>
**RSP720-3CXL-GE<br/>

''!!! Note: the supervisor engine 2 is not longer supported in the Cisco7609-S router.''<br/>

==Power supplies and power entry modules==
Both, the Cisco7609 and the Cisco7609-S router have two power supply slots on the front of the chassis, with the power supply 1 being installed on the left and the optional redundant power supply 2 being installed in the right one of the two slots.<br/>

'''Supported power supplies in the Cisco7609 router'''<br/>

*2500 watt DC-input power supply<br/>
**WS-CDC-2500W<br/>
''No power entry module is needed when using a WS-CDC-2500W''<br/>

*3000 watt AC-input power supply<br/>
**WS-CAC-3000W<br/>
''No power entry module is needed when using a WS-CAC-3000W''

*4000 watt AC-input power supply<br/>
**WS-CAC-4000W-US1<br/>
''No power entry module is needed when using a WS-CAC-4000W-US1/6''<br/>

*4000 watt DC-input power supply<br/>
**PWR-4000-DC<br/>
''No power entry module is needed when using a PWR-4000-DC''<br/>

*6000 watt AC-input power supply<br/>
**WS-CAC-6000W<br/>
''No power entry module is needed when using a WS-CAC-6000W''<br/>

*6000 watt DC-input power supply<br/>
**PWR-6000-DC<br/>
''No power entry module is needed when using a PWR-6000-DC''<br/>

'''Supported power supplies in the Cisco7609-S router'''<br/>
*4000 watt AC-input power supply<br/>
**WS-CAC-4000W-US1<br/>
''No power entry module is needed when using a WS-CAC-4000W-US1/6''<br/>

*4000 watt DC-input power supply<br/>
**PWR-4000-DC<br/>
''No power entry module is needed when using a PWR-4000-DC''<br/>

*6000 watt AC-input power supply<br/>
**WS-CAC-6000W<br/>
''No power entry module is needed when using a WS-CAC-6000W''<br/>

*6000 watt DC-input power supply<br/>
**PWR-6000-DC<br/>
''No power entry module is needed when using a PWR-6000-DC''<br/>

==Fan trays==

'''Supported fan trays in the Cisco7606 router'''<br/>
*standard fan module<br/>
**WS-C6K-6SLOT-FAN<br/>
*high speed fan module<br/>
**FAN-MOD-6HS<br/>
''!!! Note: supervisor engine 720 configurations require the '''FAN-MOD-6HS'''. '''WS-C6K-6SLOT-FAN''' will only work in supervisor engine 2 configurations.''<br/>

'''Supported fan trays in the Cisco7606-S router'''<br/>
*high speed fan module<br/>
**FAN-MOD-6SHS<br/>
''!!! Note: As a result of the sup 32 being the minimum required supervisor engine for the Cisco7606-S, no standard fan tray is supported in any cisco7606-S configuration. Both high speed fans, the FAN-MOD-6SHS and the FAN-MOD-6HS will work in the Cisco7606-S. With the FAN-MOD-6SHS being white, the colour would be the only difference.''