Difference between revisions of "Testing your GBIC per ping command"
From NesevoWiki
Jump to navigationJump to search (New page: '''Step 1:''' Enter the configuration mode. <br/><br/> '''Step 2:''' Type '''interface vlan1''' in. <br/><br/> '''Step 3:''' Now you can award a ip address. Type following in '''ip address...) |
(No difference)
|
Latest revision as of 10:37, 11 September 2008
Step 1: Enter the configuration mode.
Step 2: Type interface vlan1 in.
Step 3: Now you can award a ip address. Type following in ip address [Ip- Address][Subnetmask].
Step 4: Activate the settings with no shutdown.
Step 5: Leave this mode with exit.
Step 7: Enter the GBIC interface. Type interface gigabit 0/1 or 0/2 in to get on the GBICs.
Step 8: Activate the interface with no shutdown.
Step 9: Go back to the priveligate mode.
Step 10: Type ping <destination- IP- Address> to send echos to the other GBIC.