Difference between revisions of "Recover a Cisco Nexus N5K from the loader prompt"
From NesevoWiki
Jump to navigationJump to searchLine 17: | Line 17: | ||
* Install kickstart and system image: | * Install kickstart and system image: | ||
** <code>install all kickstart bootflash:n5000-uk9-kickstart.7.1.4.N1.1.bin system bootflash:n5000-uk9.7.1.4.N1.1.bin</code> | ** <code>install all kickstart bootflash:n5000-uk9-kickstart.7.1.4.N1.1.bin system bootflash:n5000-uk9.7.1.4.N1.1.bin</code> | ||
− | * | + | * Save and reboot |
+ | ** <code>write memory</code> | ||
** <code>reload</code> | ** <code>reload</code> |
Revision as of 14:38, 14 June 2021
- Connect to the serial console
- Connect Mgmt0 Interface to local network
- At loader prompt, configure Mgmt0 interface:
set ip 192.168.1.244 255.255.255.0
- Boot kickstart image over TFTP:
boot tftp://192.168.1.12/n5000-uk9-kickstart.7.1.4.N1.1.bin
- At the boot prompt, configure Mgmt0 interface (again):
conf t
interface m0
ip address 192.168.1.244 255.255.255.0
no shutdown
end
- Copy system and kickstart images to bootflash:
copy tftp: bootflash:
- Load system image
load bootflash:n5000-uk9.7.1.4.N1.1.bin
- Install kickstart and system image:
install all kickstart bootflash:n5000-uk9-kickstart.7.1.4.N1.1.bin system bootflash:n5000-uk9.7.1.4.N1.1.bin
- Save and reboot
write memory
reload