Password Recovery Procedure for the Catalyst 2600, 3000, 3100, and 3200 Switches

From NesevoWiki
Revision as of 14:25, 29 July 2008 by Florian (talk | contribs) (New page: '''Step 1:''' Press the SysReq button on the switch (next to the Reset button). '''Caution:''' When you clear nonvolatile RAM (NVRAM), the password is cleared but all configuration p...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Step 1: Press the SysReq button on the switch (next to the Reset button). 

    Caution: When you clear nonvolatile RAM (NVRAM), the password is cleared but all configuration parameters are also reset to 
    their default values. This means losing all options previously configured on the switch.

Step 2: Move the arrow key to clear NVRAM.

Step 3: Press Return.

The system reboots and no password is required.

Retrieved from "http://wiki.nesevo.com/index.php?title=Password_Recovery_Procedure_for_the_Catalyst_2600,_3000,_3100,_and_3200_Switches&oldid=278"