Difference between revisions of "Loading IOS on a WS-C2960X Switch Stack"
From NesevoWiki
Jump to navigationJump to search (Created page with "* Connect ("daisy-chain") all stack members with stacking cables as shown here: [http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2960-x-series-switches/whit...") |
(No difference)
|
Revision as of 17:59, 16 June 2015
- Connect ("daisy-chain") all stack members with stacking cables as shown here: WS-C2960X Stacking Guide
- Power on all stack members
- Connect one switch to your network (via the Mgmt interface)
- Connect to the serial console of the same switch
- Configure the Mgmt interface (FastEthernet 0)
- Check connectivity:
ping 192.168.1.11
- Install the nwew IOS firmware on all stack mambers simultaneously using this command:
archive download-sw /force-reload /overwrite tftp://192.168.1.11/c2960x-universalk9-mz.150-2a.EX5.bin