Difference between revisions of "Getting and Applying License Files to a Catalyst 4XXX SUP Card"
From NesevoWiki
Jump to navigationJump to search (Created page with "* Obtain the license files in the same way as with Nexus Switches * Connect to the serial console *...") |
|||
Line 3: | Line 3: | ||
* Check current license status with <code>sho ver</code> command | * Check current license status with <code>sho ver</code> command | ||
* Connect the Mgmt-Interface to the network | * Connect the Mgmt-Interface to the network | ||
− | * Configure the network (e.g. 192.168.0.244/24) | + | * Configure the network (e.g. 192.168.0.244/24): |
+ | ** <code>conf t</code> | ||
** <code>interface FastEthernet 1</code> | ** <code>interface FastEthernet 1</code> | ||
** <code>ip address 192.168.0.244 255.255.255.0</code> | ** <code>ip address 192.168.0.244 255.255.255.0</code> | ||
** <code>no shutdown</code> | ** <code>no shutdown</code> | ||
+ | ** <code>exit</code> | ||
* Check IP connectivity to TFTP server (e.g. 192.168.0.150): | * Check IP connectivity to TFTP server (e.g. 192.168.0.150): | ||
** <code>ping vrf mgmtVrf 192.168.0.150</code> (check vrf name wich <code>sho run</code> command) | ** <code>ping vrf mgmtVrf 192.168.0.150</code> (check vrf name wich <code>sho run</code> command) |
Latest revision as of 10:14, 6 May 2021
- Obtain the license files in the same way as with Nexus Switches
- Connect to the serial console
- Check current license status with
sho ver
command - Connect the Mgmt-Interface to the network
- Configure the network (e.g. 192.168.0.244/24):
conf t
interface FastEthernet 1
ip address 192.168.0.244 255.255.255.0
no shutdown
exit
- Check IP connectivity to TFTP server (e.g. 192.168.0.150):
ping vrf mgmtVrf 192.168.0.150
(check vrf name wichsho run
command)
- Set Mgmt interface as interface to use for TFTP transfer:
conf t
ip tftp source-interface FastEthernet 1
exit
- Copy the
.lic
file from TFTP servercopy tftp: bootflash:
- Apply the license
license install bootflash:<filename>.lic
- Reload the switch, do not save config
- Check if the license has been applied correctly using the
sho ver
command